6V servo @ 4.8V
06-23-2005, 03:54 PM
#1
Member
Thread Starter
Join Date: Dec 2004
Location: Sao PauloSP, BRAZIL
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
6V servo @ 4.8V
Hi guys,
I have a Raptor 30 V2 and decided to replaced my tail servo, a JR 531 for a faster one. I remember that I had a KO Propo wich I used for steereing my Serpent Impact and is real fast and strong, something like 0.09s and 90 in, but is designed to run at 6V.
Well, i'm runing 4,8V 1400 mAh NiCads.... Do you thing there is any problem? [&:]
I have a Raptor 30 V2 and decided to replaced my tail servo, a JR 531 for a faster one. I remember that I had a KO Propo wich I used for steereing my Serpent Impact and is real fast and strong, something like 0.09s and 90 in, but is designed to run at 6V.
Well, i'm runing 4,8V 1400 mAh NiCads.... Do you thing there is any problem? [&:]
