JR 591 servo 6.0v?
#1
Thread Starter
Join Date: Jul 2004
Location: Cape Town, SOUTH AFRICA
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
JR 591 servo 6.0v?
I have 4 JR 591 servos that I have bought for installing in a GP Extra 300S with a Saito 125 engine. I had intended to use a 6v battery for this setup on Spectrum reciver for DX7, I have read that the 591 servo is not recommended for use with 6v and also not recommended for use in sport or precision aerobatic planes over 40 size.
I could swap the servos in my 4* 40 Spectrum DS 821, and install the 591's in the 4*.
Or just get a new set of servos.
Any comments?
I could swap the servos in my 4* 40 Spectrum DS 821, and install the 591's in the 4*.
Or just get a new set of servos.
Any comments?
#2
My Feedback: (2)
RE: JR 591 servo 6.0v?
http://www.rcuniverse.com/forum/m_17...tm.htm#1747760
It looks like they have plenty of torque and they are single ball bearing. They will work with 6V.
It looks like they have plenty of torque and they are single ball bearing. They will work with 6V.