Cortex Gyro
 

Have a Regular Cortex gyro, not a Pro.

After doing some work on the jet, I always rebind and reset the gyro.

The problem is now the Cortex won't correct the ailerons in the right direction. I've tried redoing it (using the jumper to teach the gyro) about 10 times and still the same outcome.

The servos are on a Y harness but were working just fine before I did the work to the plane.

Did the Cortex take a crap on me?

Doubtful.

Did you change the stock mounting position? If you did that then you need to set the mounting position with the software then do the teach-in process. I'm guessing you wiped that out when you did the reset