graupner servos
 

I bought an airplane second-hand that originated in Germany by AFF. The fuse has cutouts for Graupner C261 servos. (micro-minis) Can someone tell me where to get them in the US or what brand is marketed in the US that have the same cases. The cutouts are very tight so I need a servo that will fit.

RE: graupner servos
 

Micro-Power-Servo C 261 5125.LOSE

with reinforced gearbox and plain bearings

Product information
Micro Power Servos Micro Power servos with small dimensions, in the weight class of 8-10 gr. The Micro Power servos have been conceived for universal use in Slow Flyers, HLG Gliders, electric helicopters, miniature flying models, and small boats for which high positioning torque, and smallest possible dimensions are required. A Direct Drive potentiometer, the latest Micro Servo technology, and a proven electric motor, are the distinctive features of this Micro Power concept.


Specification
Operating voltage 4,8 ... 6 V
No-load current drain approx. 5 mA
Max. current drain 0,45 A
Env./approx. 14 Ncm (1400 cmg)
Rotary range 2x45°
Transit time 0,14 s/40°
Weight 8 g
Dimensions (Long.xBxH) ca. 22 x 11 x 21 mm

These all have the same case size and approximate power.

Multiplex MS-X2, MS-X3
MPI MX-50, MX-50HP
JR 241
FMA S80, S90
Futaba S 3106
Cirrus 20BB, 21BB

RE: graupner servos
 

All Graupner servos are JRs. Graupner buys them in Japan and adds different stickers to them. So check your favorite JR dealer.

Joe