RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Radios, Transmitters, Receivers, Servos, gyros (https://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/)
-   -   JR 10X Smoke Setup (https://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/3298448-jr-10x-smoke-setup.html)

rotorriser 08-25-2005 03:51 PM

JR 10X Smoke Setup
 
Hi Guys,
Checking to see if any of you have set up your JR 10X with smoke linked to your throttle? I have mine on the gear switch but I’d like to be able to reduce or shut the smoke off when I bring the throttle down. If any of you have experience with this and could explain how to set it up I would appreciate it.
Thanks,
Miles

Pile-O-Wood 08-25-2005 05:01 PM

RE: JR 10X Smoke Setup
 
Depends on the type of smoke pump you have. Need to know if it is a fixed or proportional type of pump?

rotorriser 08-25-2005 06:48 PM

RE: JR 10X Smoke Setup
 
I'm using a check valve and a smoke valve on a proportional channel. So the flow is in relation to the servo movement.

Pile-O-Wood 08-25-2005 06:57 PM

RE: JR 10X Smoke Setup
 
You can mix an unused channel to the throttle. Either use a linear mix or you can use a multi-point mix to control the amount smoke oil flow. Hope this helps.


All times are GMT -8. The time now is 07:57 AM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.