servos for spektrum DX6
 

this may be a stupid question but are there any servos compatable with DX6? I thought i read somewhere there is but i can't find it again.

RE: servos for spektrum DX6
 

Why would you think you could not use any normal servo with this system? You can.

Ed M.

RE: servos for spektrum DX6
 

bentgear..........do you have a sourse for this information ?

RE: servos for spektrum DX6
 

Have you looked at the servo the radio ships with? Plain old normal nothing fancy run of the mil cheap non digital servo. And anything that has been hooked up to one seems to function fine. Both the ground and air version.

Have you seen anywhere on their website, in the instructions, or in actual use that would lead you to think otherwise?

Ed M.

RE: servos for spektrum DX6
 

The aircraft radio setup comes with a set of very good , very small servos.
However the signal for the servo seems to work perfectly with any of my JR servos. up to inc 8611A (just playing with it)
The common power buss may not handle a million amps -but that is of no concern here . The present system is intended for light models flown within a 1/4 mile of the TX
As such -it is a crackerjack setup

RE: servos for spektrum DX6
 

thanks for your input! i guess for my 2nd aircraft i will just try sevos with a jr plug ( haven't checked but i assume you need that plug)! Thanks again!

RE: servos for spektrum DX6
 

[8D]There currently are only 2 styles of servo plugs in production, Futaba is one, the rest of the "world" uses the JR/Hitec/Aitronics Z connector, usually referred to as "universal" so you gotta lotta great servos to choose from!