RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Radios, Transmitters, Receivers, Servos, gyros (https://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/)
-   -   Transmitter Cases !! Guys!!!look Here!!!! (https://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/822648-transmitter-cases-guys-look-here.html)

alcohol burner 06-01-2003 06:14 AM

Transmitter Cases !! Guys!!!look Here!!!!
 
DONT GET RIPPED OFF AT EBAY OR ANYWHERE ELSE!!!!



IF YOU ARE INTERESTED IN TRANSMITTER CASES THEN GO TO YOUR LOCAL LOWES HOME IMPROVEMENT STORE.....IT IS VITRUALLY THE EXACT SAME CASE AS ANY HOBBY SHOP OR EBAY ITEM THAT YOU CAN BUY.....ITS ONLY $24.87 !!!!!!!
IVE SEEN THEM GO AS HIGH AS 40.00 ON EBAY PLUS YOU HAVE TO PAY SHIPPING.....ITS A RIPOFF!!!!!.....THE ONLY DIFFERENCE IS THAT ITS NOT GOING TO SAY JR , FUTABA, HITEC, OR AIRTRONICS ON THE TOP...WHO CARES....

JUST THOUGHT I'D SHARE THE INFO WITH ALL OF YOU, IN CASE YOU DIDNT KNOW.... :D http://www.lowes.com/lkn?action=prod...10203-VGC-5200



TIM :D

RobertWilliams 06-01-2003 01:15 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
Better yet, goto Wal-mart and buy a handgun case for 14.95 and make a radio case out of it.

TT2 06-01-2003 01:27 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
Thanks Tim, I was eyeballing one of those cases at Lowe's just the other day. The question is: Will two JR 8103s fit in it?

-Tom

alcohol burner 06-01-2003 01:32 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
OH YEAH....2 WILL FIT....MAY HAVE TO REMOVE ANTENNAS, BIT THAT SHOULD BE NO HASTLE AT ALL....JUST DEPENDS HOW MUCH STUFF YOU PACK IN THERE...AHAHA...

NEVER THOUGHT ABOUT A GUN CASE...SOUNDS LIKE THAT WORK FINE ALSO....MAY BE BETTER QUALITY SINCE ITS FOR GUNS....NOT FOR SURE....BUT WORTH CHECKING IN TO FOR THAT PRICE.....THANKS FOR THE INFO....

TIM

rivercityflyer 06-01-2003 10:51 PM

transmitter case
 
bought mine at wal-mart a couple months ago for 7.95.its plastic and a has a wildlife scene molded in , but works great.

TT2 06-01-2003 11:02 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
The ones that Tim is talking about are aluminum...they are identical to the JR cases except for the sticker.

-Tom

IronZ 06-02-2003 04:28 AM

Transmitter Cases !! Guys!!!look Here!!!!
 
Actually, they are ten times better than the JR cases. I've seen both side by side and man is that JR case junk. I have the Lowes special and you can't beat it.

IronZ

4*60 06-02-2003 05:40 AM

Transmitter Cases !! Guys!!!look Here!!!!
 
Wal-Mart had aluminum cases for 2 radios like the Lowes, for 19.95 CDN. Should be less US dollars. I love the case!

bentgear 06-02-2003 12:48 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
The bad part about the one from Lowes and a couple other locations is you still have to go out and buy foam to go in the case. Every once and a while Harbor Freight and WalMart get in some aluminum cases that have the foam already in them. This is the foam that is precut into little blocks so all you do is pull out the blocks for a custom fit. Bought several from WalMart two years ago and they are still in use.
The ones with the dividers so make good tool and part boxes.
As far as the JR case being junk, I think what you were looking at was a junk case somebody placed a JR sticker on.
Ed M.

jimo811 06-02-2003 12:59 PM

Transmitter Cases
 
I have had, and still do have all of the above. The plastic gun case with the wildlife scene works fine. I still have 2 of the Home Depot cases with the dividers, and they hold 2 radios fine, and I now have one of the JR 10X cases, and they are definitely not junk. Are they worth the extra money? That's up to you and how much money you want to spend on a case. They come ready for your radio, with nicer locks, and with that neat JR logo, whereas the others don't. Again, how much is your legwork worth?

IronZ 06-02-2003 03:22 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
The case I got from lowes came with the foam, and the Jr case was an actual JR. Do they maybe make two different styles? This one was smaller than the Lowes special and the sides were bubbling out. It just looked very cheap. Certainly not worth the money that was paid for it.

IronZ

rthorne 06-02-2003 05:27 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
The tool box from Lowes is a nice one for $20. I have one and it will hold two 8103's or probably any two radios for that matter. Just take out the desired foam for your radio and your in business.

Fred 06-02-2003 06:07 PM

Case
 
I ordered Airtronics sticker's and masked off the area where I wanted it and filled in the space with epoxy let dry and stuck the stiker to that work's ok ..

bentgear 06-02-2003 06:19 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
With foam thats a fair price. The link showed one with the dividers, and altho the dividers can be adjusted to fit around the radio, there is still a lot of room for movement, might as well put it in a paper sack.
I have used the pistol cases when I raced RC cars for the wheel type transmitters. They work good, but theres just something about the aluminum case that keeps me using it.

Tip: Next Christmas check out the tools section in WalMart. They have aluminum cases, sometimes with foam and sometimes with dividers from $9.95 to $14.95 depending on location. Have not seen them there any other time of year there.
Ed M.

gimpy55-RCU 06-02-2003 11:22 PM

radio cases
 
If you have more than 2 radios a cheap shot gun case the one that is built for two works great cut radio outline in foam. Mine will hold 6 radios and it has handles and is easy to carry.
Gimpy 55

alcohol burner 06-03-2003 02:28 AM

Transmitter Cases !! Guys!!!look Here!!!!
 
GUYS!!!!!! GO TO THE LINK I PROVIDED....
I WENT AND PURCHASED 4 OF THEM TODAY....


THEY COME WITH THE FOAM IN IT....

THEY ARE PRECUT INTO LITTLE 1/2" SQUARES...AND COME WITH THE DIVIDERS......TOOK ME ABOUT 10 MINUTES TO GET FOAM OUT OF ALL FOUR.....

GO TO THE LINK....GET THAT EXACT BRAND......THESE CASES ARE VERY DURABLE AND COME WITH A LIFETIME WARRANTY.....


THANKS...

TIM

MHawker 06-03-2003 04:07 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
Tim,

Thanks for the link.

When you use all CAPITAL LETTERS while typing, it is harder to read. It also means you're yelling. :)

Mike

alcohol burner 06-03-2003 04:33 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
I USE CAPS ALL THE TIME....DONT KNOW WHAT THE BIG DEAL IS...
IF YOU USE ALL LOWER CASE DEOS THAT MEAN YOU DONT HAVE PROPER PUCTUATION?....JUST CURIOUS WHO CAME UP WITH THE RULES!..........
PEOPLE SHULDNT "READ INTO IT" ANY MORE THAN WHAT IT IS.


THANKS ANYWAY...

TIM

alcohol burner 07-09-2003 03:55 AM

CASES
 
Thanks for the cool links Bill.....much appreciated.....


tim

Ghia 07-09-2003 06:26 AM

where can I get just the inside foam?
 
I have a lowes case already and a different brand case just like it but that doesnt have any foam in it. Where can i get foam like the Lowes one I want to make a camera case out of it. Thanks.

Jeff

alcohol burner 07-09-2003 04:33 PM

FOAM
 
Go back to Lowes....tell them you need replacement foam for the box you bought off of them....Dont talk to some moron...you will get nowhere....Talk to someone who "looks" like they may know something...hahahaha......

Tim

Muah 07-10-2003 04:09 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
1 Attachment(s)
well made mine from the case that the radio came from.....

Muah 07-10-2003 04:14 PM

Transmitter Cases !! Guys!!!look Here!!!!
 
1 Attachment(s)
just need to find a handle for the thingee.....

The PIPE 07-13-2003 07:28 PM

Just got one MYSELF-and my old Proline knobby Tx'es JUST fit!
 
Dear Fellow RCU'ers:

The PIPE Here yet AGAIN-and this Sunday I finally got MYSELF http://smilies.crowd9.com/contrib/geno/wink.gif one of these cases at MY local Lowe's store.

These were on sale for JUST under $20 apiece, so I was thinking of getting another one in something like "within the next two weeks of time" for my soon-to-be-GROWING http://smilies.crowd9.com/contrib/tweetz/nod.gif collection of Gordon Anderson MICROSTAR based "built-it-myself" single stick radios. (Got the encoder for the SECOND one ordered from Gordon himself last weekend!)

The "acid test" for MY needs for that Lowe's carrying case-and for ANYONE ELSE who has an old Proline single stick case with the 3 inch deep Tx case dimension, to accomodate the "original Chidgey Stick" three axis metal gimbal joystick to place a MicroStar Tx encoder into, like yours truly is planning to do is to make sure that THAT particular Tx will actually FIT inside the DEPTH of that nice case! Someone by the handle of "Turbines" has already done a MicroStar converison of one of the old ProLine "knobbies" here at RCU, in my thread about "building your OWN single stick radios" here at http://www.rcuniverse.com/showthread...053&forumid=70 ...his posts number 21 through 24 in that thread are of HIS MicroStar-stuffed ProLine knobby radio...and I'd bet HE would like to know about that case's suitability!

I removed ALL the loose foam "stuffings" from the case, and just left the case with the gray foam liner inside...then I placed one of my THREE ProLine knobby radios inside that case, and CAREFULLY closed the lid...AND IT CLOSED ALL THE WAY!!!

WHOOPEE...http://www.gamers-forums.com/smilies...unny/jump3.gif...and NOW I know I had the RIGHT case to stow at least TWO of those Proline knobby radios in, once I get them in operation sometime within the next 18 months or so!

Goin' to be letting Turbines know about THIS nice feature http://smilies.networkessence.net/s/...iggthumpup.gif of that Lowe's metal case...and I bet that he will want one, too!

Yours Sincerely,

The PIPE! ;))


All times are GMT -8. The time now is 05:06 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.