2.4 Receiver Compatibility
 

Does anyone know if you can mix and match 2.4 gear???? For example can I run a spektrum radio with an airtonics 2.4 GHz receiver?

RE: 2.4 Receiver Compatibility
 

No, all 2.4Ghz systems are proprietary, just like the old PCM receivers[&o]
BTW, do you fly with the Pine Barren Modelers?
Pete

RE: 2.4 Receiver Compatibility
 

For now, you need to stay with the same manufacturer's Tx/Module and Rx. Spektrum Rx's work with Spektrum and JR 2.4 Tx's. JR 2.4 Rx's work with Spektrum and JR 2.4 Tx's. There may be some low end Spektrum Rx's that won't work with higher end Spektrum and JR 2.4 Tx's.

RE: 2.4 Receiver Compatibility
 

With the exception of JR & Spektrum, all receivers are brand specific, that is they are not compatable with other manufacturers transmitters. With JR/Spektrum, DSM2 Tx's are backward compatable with DSM receivers, but the DSM Tx cannot be used with DSM2 Rx's.

Clear?

John C

RE: 2.4 Receiver Compatibility
 

No Pete, i don't. Just kinda getting into airplanes. Had an align trex 450xl for a little while and found out quickly how booring hovering is and just didnt have the time to practice. So i got back into rc cars and now i am gonna give airplanes a shot.... Thanks for the info.

RE: 2.4 Receiver Compatibility
 

Is the airtronics rds8000 any good?

RE: 2.4 Receiver Compatibility
 

There are a number of threads I have been reading, on RCU, extolling the virtues of the 2.4 Airtronics radios. It sounds like they have a good start.

RE: 2.4 Receiver Compatibility
 

The Airtronics RDS8000 is fantastic!

Here is the RC Universe review:

http://www.rcuniverse.com/magazine/a...article_id=995