Tubes for tube chassis
02-20-2006, 08:18 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Location: Kutztown, PA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Tubes for tube chassis
i was wondering what kind of tubes are Im going to want to use when building my own tube chassis. what kind of tubes. How much of it will i need and also what should i use to connect the tubes solder, or some other thing
02-21-2006, 02:58 PM
#2
Junior Member
Join Date: Nov 2005
Location: Knoxville,
TN
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tubes for tube chassis
This link should help with that question.
http://www.rccrawler.com/forum/showt...ght=tube+build
Most use 1/4 inch break line and silver solder to weld it together.
http://www.rccrawler.com/forum/showt...ght=tube+build
Most use 1/4 inch break line and silver solder to weld it together.
ORIGINAL: BadMammaJammas
i was wondering what kind of tubes are Im going to want to use when building my own tube chassis. what kind of tubes. How much of it will i need and also what should i use to connect the tubes solder, or some other thing
i was wondering what kind of tubes are Im going to want to use when building my own tube chassis. what kind of tubes. How much of it will i need and also what should i use to connect the tubes solder, or some other thing
