rc4wd beast 2
 

I was think of getting a rc4wd beast 2 I can get the ESC (rocker dig 2) and motor T55 maybe and just to figure what pinion to use. Was just thinking of use Axial and any thoughts on this are welcome.

i think a 14T is what is recommended but iv'e read some use a 11T pinion. you could get a pinion gear set that comes with 5 or 6 different ones so you can find the one that's best for you.

how many 14T or 11T come with a P32 and the motor sizes on the web site rec a 35T,45T or a 55T.

not sure what you mean.
you can get pinions that are 32 pitch and 48 pitch and 64 pitch.
they recommend 3 different sizes so depending on what your going to do with you can choose how it runs. the higher the number the slower you go but will have more torque.

I was asking how common a pinion with 11T or 14T are.It said on the RC4WD wed site that a 35T,45T and 55T motor are recommend for the truck.