RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Rock Crawlers (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/)
-   -   Everest 10 skid plate (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/11676634-everest-10-skid-plate.html)

Overvolted 03-23-2020 07:29 AM

Everest 10 skid plate
 
I just bought an Everest 10 crawler to enjoy my quarantine. This is my first crawler and im hooked as its a blast to drive. Im looking for a differential skid plate as mine is scuffed up pretty good already. Ive seen them for the Gen7 pro and also scx10. Does anyone know if there is one for the Everest 10 or one that may fit with a little help? How about any custom ones? Looking for ideas,thanks.

Overvolted 03-30-2020 07:46 AM

https://cimg3.ibsrv.net/gimg/www.rcu...ef5498d38f.png
To answer my own question I bought Red Cat Everest Gen 7 Pro axel skid plates as I did not see any for the Everest 10. I had to modify the area behind the diff case on the Gen 7 plates due to the curve in them and my diffs having more of a flat plane on the bottom of the diff. I hammered them flat and mounted them, measured where the diff ends and bent the end of the skid plate up to avoid catching(did almost the same mod on my offroad golf cart). The mounting holes on the skid plate matched up with my diff and I was able to reuse the stock screws although they will be replaced with just slightly longer screws in the future. They work perfect, do not catch at all and will save my axels from wear and breaking. Im having issues uploading more pics and will try in a second post

Overvolted 03-30-2020 07:51 AM


Originally Posted by Overvolted (Post 12593046)
https://cimg3.ibsrv.net/gimg/www.rcu...ef5498d38f.png
To answer my own question I bought Red Cat Everest Gen 7 Pro axel skid plates as I did not see any for the Everest 10. I had to modify the area behind the diff case on the Gen 7 plates due to the curve in them and my diffs having more of a flat plane on the bottom of the diff. I hammered them flat and mounted them, measured where the diff ends and bent the end of the skid plate up to avoid catching(did almost the same mod on my offroad golf cart). The mounting holes on the skid plate matched up with my diff and I was able to reuse the stock screws although they will be replaced with just slightly longer screws in the future. They work perfect, do not catch at all and will save my axels from wear and breaking. Im having issues uploading more pics and will try in a second post


Cant upload any more pics as I get an error for security key missing. Will try again later.


All times are GMT -8. The time now is 12:44 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.