RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Rock Crawlers (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/)
-   -   rc pulling (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/5007758-rc-pulling.html)

blowpopracer 11-17-2006 01:01 PM

rc pulling
 
Ok did a search and really didnt come up with anything. Looked on google and ebay with no luck so hopefully u all can help me. I want to build my own pulling sled. I need some plans to figure out the size and gear ratio's used etc. So if any of u all know of any sites that give this info please help me. Or atleast some manufactures of sleds. Thanks.

Anomie 11-17-2006 01:24 PM

RE: rc pulling
 
There are some pictures of a sled [link=http://www.angelfire.com/pa/hootchas/]on this page[/link].

I couldn't find much else, either. I hope this helps you :-)

playtime56 11-18-2006 04:43 AM

RE: rc pulling
 
http://www.wwpa4fans.org/index.htm Hope this helps

zja08 11-22-2006 10:14 PM

RE: rc pulling
 
Is there anywhere I can find info on rc pulling? What trucks do you use? Electric or Nitro? And any other info would be greatly accepted.

Thanks

Anomie 11-22-2006 10:29 PM

RE: rc pulling
 
Take a look at the links above, and also try:

[link=http://nrctpa.com/]http://nrctpa.com/[/link]

[link=http://www.performancedevices.com/nr.htm]http://www.performancedevices.com/nr.htm[/link]

Good luck in your search :-)

Acs_guitars 11-22-2006 10:29 PM

RE: rc pulling
 
I have seen both electric and nitro used, but most opt for gasoline power becase of the added weight and torque they provide... perfect for pulling.

INsavageXpuller 02-25-2007 01:34 AM

RE: rc pulling
 
we r getting in to it buddy owns a hobby shop putting a track in as soon as ground thaws to get our clay. we r using savages with a lil mods as in hitch weight box etc. ill post pics when i get my set up painted. have 8hrs in it bending to fit frame perfect etc. its sweet.

sneff 02-25-2007 08:36 AM

RE: rc pulling
 
If your building a puller and want to compete follow NR/CTPA rules. They have a ton of different classes electric and nitro.
Here are a couple pics of my truck. this truck pulls in the 15# 2wd nitro class.
[img][/img]http://i35.photobucket.com/albums/d1...one/insane.jpg[img][/img]
[img][/img]http://i35.photobucket.com/albums/d1...lercloseup.jpg[img][/img]

diablo1200 03-01-2007 09:34 AM

RE: rc pulling
 
Anyone know any resources for pulling bodies? I might want to enter 2wd Sportsman class and the limit is 24 inches. I know Parma used to make a chevy pulling body that was long enough.

sneff 03-01-2007 10:55 AM

RE: rc pulling
 
I know exactly what body your talking about. I think a company called sassy chassis now has that mold. or one just like it.
I know there are a few guys that produce different pulling bodies but I'm not exactly sure who they are. I will try and get some info for ya!!

junebug48 11-20-2007 11:27 AM

RE: rc pulling
 
ttt

junebug48 11-20-2007 04:11 PM

RE: rc pulling
 
[8D]hi . doe's anyone know where i can find a used pulling sled beside's e-bay ? if so please give me a link or tell me . thank's for your time . ;)

rye 11-20-2007 09:58 PM

RE: rc pulling
 
hi
does anyone have plans for both the puller and the sled thanks rye
looks like a new hobby for me:D

junebug48 11-27-2007 09:48 AM

RE: rc pulling
 
ttt..

rye 11-27-2007 08:52 PM

RE: rc pulling
 
hi
whats ttt ?

junebug48 11-27-2007 08:53 PM

RE: rc pulling
 
[8D]hi . it mean's to the top . thank's . ;)

junebug48 12-01-2007 06:35 PM

RE: rc pulling
 
[8D]hi . i am almost done finishing my pulling truck and it look's prety good so far lol . it has chane drive insted of belt and the frame is made out of alum. it is 26 inche's long by 11 inche's wide . it has clod rear tire's and rim's . i will post pic's later . i also have a pull sled . thank's . ;)

The Real Dogman 12-01-2007 06:49 PM

RE: rc pulling
 
Nice!! gotta post pics and Definitely Do a build thread on the sled!!!!!

junebug48 12-03-2007 12:21 PM

RE: rc pulling
 
1 Attachment(s)
[8D]hi . here's some pic's of my pulling truck and pulling sled . hope you like them . thank's .;)

Anomie 12-03-2007 10:47 PM

RE: rc pulling
 
That's really cool [sm=thumbs_up.gif]

The sled looks awesome! Nice work!

rye 12-04-2007 06:16 PM

RE: rc pulling
 
hi
where did you get the plans from? thanks rye

junebug48 12-04-2007 06:20 PM

RE: rc pulling
 
i had to buy them, from someone i knew that had 1 last copy

rye 12-04-2007 08:31 PM

RE: rc pulling
 
hey junebug
do you have anymore copys?

junebug48 12-05-2007 07:14 AM

RE: rc pulling
 
i can make them , but i paid $25.00 for this 1

junebug48 12-10-2007 07:47 PM

RE: rc pulling
 
1 Attachment(s)
[8D]hi . i just got done making this brand new pulling truck . i built this one from scatch . it has a new alum. and 5mm graphite chassis that i made and it has a 3/8 inch rear axle and a front drop axle i made it all from scratch lol . i used the old one's body for now . i am no longer using the old one as this one will pull alot more and is more ajustable than the old one . i hope you like the pic's . thank's . ;)


All times are GMT -8. The time now is 08:21 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.