RCU Forums - BEC question

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Rock Crawlers (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/)

- - BEC question (https://www.rcuniverse.com/forum/rc-rock-crawlers-277/7516183-bec-question.html)

Snaut Rocket

05-19-2008 06:43 PM

BEC question

Im going to get a esc for my axial that has a bec of 5v.
Should i go ahead and get the external bec so I can get a full 6v to my servo or will i be okay.

The Real Dogman

05-19-2008 06:56 PM

RE: BEC question

Depends on what battery capacity you are ging to use.. If you use over 8cells or 9.6vlts you will definitely need a bec but if you are just looking to control the voltage to the rx then yes.

Snaut Rocket

05-19-2008 10:39 PM

RE: BEC question

I was going to use a 6 cell 4400 mah pack.
So i guess i will get one.

The Real Dogman

05-19-2008 10:43 PM

RE: BEC question

Maybe I should have said, depends on what battery voltage your going to run. A 6cell is only 7.2volts you should good without a BEC with that voltage but if you want to controll the voltage to the RX then get one, but you dont NEED a BEC with that battery

Snaut Rocket

05-19-2008 10:55 PM

RE: BEC question

But my servos will still be lacking some punch cause there not getting the full 6v?
I have no clue what im dealing with here.[&o]

All times are GMT -8. The time now is 09:48 PM.