Hangar 9 20cc Tiger Moth Build
Guys, I am curious if you would be interested in a full build thread on the new Hangar 9 Tiger Moth similar to the one I did on the P-47. Let me know if this is the right forum for it or if it should be somewhere else.
Thanks, |
RE: Hangar 9 20cc Tiger Moth Build
Please do. A couple of us are on the the waiting list and we are considering other engines besides the EVO.
Thanks Charlie |
RE: Hangar 9 20cc Tiger Moth Build
Please do John, the tiger Moth has some very graceful lines and I'm sure you will find a lot of eager interest pilots once you get started! I love to see builds on an airplanes I may want to consider building and flying.
Thank you |
RE: Hangar 9 20cc Tiger Moth Build
I'm assuming its an ARF??? Cant imagine H9 would have actually brought out a "full build" kit......
|
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: loser I'm assuming its an ARF??? Cant imagine H9 would have actually brought out a ''full build'' kit...... I still live in hope Top Flite will bring out a Staggerwing kit since the ARF is so popular. Something in a smaller scale than the ARF would be nice. |
RE: Hangar 9 20cc Tiger Moth Build
1 Attachment(s)
I'm on the list to get one as well so a build thread would be great. It sure is a good looking moth.
Carl |
RE: Hangar 9 20cc Tiger Moth Build
Would love to have one of these, but I wish it was a different color scheme. Something military like the British camo and yellow. Too bad all these ARFs could not be released ARC. Then I could just cover it myself.
|
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: John Redman Guys, I am curious if you would be interested in a full build thread on the new Hangar 9 Tiger Moth similar to the one I did on the P-47. Let me know if this is the right forum for it or if it should be somewhere else. Thanks, John Yes, please! I've got one on order. Do you know the projected delivery date? Thanks |
RE: Hangar 9 20cc Tiger Moth Build
Woild love a nice big Tiger Moth kit with working gear and all.. Just putterin around the sky doing lazy aerobatics. :)
|
RE: Hangar 9 20cc Tiger Moth Build
To answer a few questions here. The Tiger Moths are on the way and should be in customers hands within the next 30 days.
As for an ARC, you can strip the model in about 20 minutes. Cost to save on covering is so low it isn't worth it from a manufacturer's stand point. We have tried this in the past and threw models away as they did not sell. I think that Top Flight has seen this as well as they did the 1/5th scale Mustang and have not done another one since. It also leaves an issue on how you will paint the fiberglass parts. Modelers just don't have good paint solutions for them, most of our paint manufacturers from eyars past have left the business. As for building, that part of our hobby is a lost art and I would believe the sky is falling before believing that building is coming back. ARF's and repair parts are what sells. I do not like that but it is a fact across not only our nation, but other nations as well. It is a sad day. As for a different scheme, I woudl have loved to have had them do the yellow/camoflage scheme. Just not executable on a mass produced model without (1) increasing the cost by a significant amount and (2) changing the fuselage structure to ensure a location to adhere the yellow/camo line to. So I will be starting this shortly. Stay tuned. For those of you that were not aware of the P-47 build thread I did, it lives here. http://www.rcuniverse.com/forum/m_10...m.htm#10906674 |
RE: Hangar 9 20cc Tiger Moth Build
There already ARE nice big tigermoth kits out there.. FYI
To the preson who thinks "building is on the rise" I have some ocean front property in Kansas if you're interested..Cheap! |
RE: Hangar 9 20cc Tiger Moth Build
Tiger Moths began leaving Horizon today, to US dealers participating in the Fast Forward program.
|
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: John Redman To answer a few questions here. The Tiger Moths are on the way and should be in customers hands within the next 30 days. As for an ARC, you can strip the model in about 20 minutes. Cost to save on covering is so low it isn't worth it from a manufacturer's stand point. We have tried this in the past and threw models away as they did not sell. I think that Top Flight has seen this as well as they did the 1/5th scale Mustang and have not done another one since. It also leaves an issue on how you will paint the fiberglass parts. Modelers just don't have good paint solutions for them, most of our paint manufacturers from eyars past have left the business. As for building, that part of our hobby is a lost art and I would believe the sky is falling before believing that building is coming back. ARF's and repair parts are what sells. I do not like that but it is a fact across not only our nation, but other nations as well. It is a sad day. As for a different scheme, I woudl have loved to have had them do the yellow/camoflage scheme. Just not executable on a mass produced model without (1) increasing the cost by a significant amount and (2) changing the fuselage structure to ensure a location to adhere the yellow/camo line to. So I will be starting this shortly. Stay tuned. For those of you that were not aware of the P-47 build thread I did, it lives here. http://www.rcuniverse.com/forum/m_10...m.htm#10906674 |
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: BobH To the preson who thinks "building is on the rise" I have some ocean front property in Kansas if you're interested..Cheap! |
RE: Hangar 9 20cc Tiger Moth Build
My local hobby shop reports he has seen a slow increase in the number of rc pilots seeking information and making purchases of materials to try their hand at building over the last year. Now are they building from the ground up, modifying an existing ARF, or building from plans or building their own designs he doesn't know. But he is seeing purchases being made. It could be local it could be wide spread but it is happening. Considering the markup on hobby materials the LHS are going to be the most sensitive in following trends, they have to if they want to survive and make a living. Look at the percentage of local shops still in business after 10 years, I'll bet it can't be more than 10% and I would hazzard a guess it is less than 10%.
|
RE: Hangar 9 20cc Tiger Moth Build
It is great to hear there are guys out there trying their hand at building, whether from scratch of modifying an ARF or building an old kit. There will always be those that prefer to make their own over one that is preassembled like the ARF's of today. I truly miss seeing the new creations show up at a club field. That was a fair amount of the love of going to the field on the weekend when I was a kid. You heard a phone call or two about someone finally had xyz model ready for a maiden and a fair amount of the club showed up to see and support. Today ARF's make maidens almost every weekend in a busy club to a point they get lost in the mix at times.
While there are still a few companies bringing "kits" to life (whom I definitely applaud) I doubt we will see any more from teh big names that used to be in the game. Sales dollars just are not there anymore is my belief. |
RE: Hangar 9 20cc Tiger Moth Build
I must agree at the current level even with a slow increase the demand is not there to recover the cost of developing a kit for the big boys. Now if the demand goes up considerably and with the advantage of laser cutting over the cost of die cutting it could become feasable or you might see the big boys entering into a distribution agreement with smaller companies. A lot would have to do with the cost/benefit of the businesses involved. The main thing you would need is to see a lot of new builders before anything could happen. Face it ARFs are cheap because the labor cheap in the east and it is the availability of cheap ARFs and Park Fliers that will pull in a lot of new people into the hobby. It will be the world economy that will drive the changes in the future.
|
RE: Hangar 9 20cc Tiger Moth Build
I hate all the junk ARFs on eBay and I do not recommend them at all.
Support your local hobby store, even if he has to order your solatex natural from BUSA. We drive them out of business ourselves. |
RE: Hangar 9 20cc Tiger Moth Build
In the world of kit manufacturing die cutting is far lower cost than laser cutting. Laser cutting takes a lot of time and the machines are not cheap, especially when you get a bed large enough to do the job. Die Cutting is the easiest and lowest cost in mass production. For me I have no love of the die cutting experience. Did that enough in my younger years. Laser cutting ensures far more acurate airfoils and a more precise fittign parts count for easier building.
With the huge influx of young people into the hobby in the past 5 years they unfortunately do not have any real love of the creativeness of building and are more of the immediate gratification society. I doubt the economy will have much to do with a change in this arena. You will need to change the position of society as a whole to see a difference. |
RE: Hangar 9 20cc Tiger Moth Build
Ok these are shipping now! I'm ready...
|
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: John Redman To answer a few questions here. The Tiger Moths are on the way and should be in customers hands within the next 30 days. As for an ARC, you can strip the model in about 20 minutes. Cost to save on covering is so low it isn't worth it from a manufacturer's stand point. We have tried this in the past and threw models away as they did not sell. I think that Top Flight has seen this as well as they did the 1/5th scale Mustang and have not done another one since. It also leaves an issue on how you will paint the fiberglass parts. Modelers just don't have good paint solutions for them, most of our paint manufacturers from eyars past have left the business. As for building, that part of our hobby is a lost art and I would believe the sky is falling before believing that building is coming back. ARF's and repair parts are what sells. I do not like that but it is a fact across not only our nation, but other nations as well. It is a sad day. As for a different scheme, I woudl have loved to have had them do the yellow/camoflage scheme. Just not executable on a mass produced model without (1) increasing the cost by a significant amount and (2) changing the fuselage structure to ensure a location to adhere the yellow/camo line to. So I will be starting this shortly. Stay tuned. For those of you that were not aware of the P-47 build thread I did, it lives here. http://www.rcuniverse.com/forum/m_10...m.htm#10906674 G'day John, mate while I agree with a lot of what you say I can state with high degree of confidence that builders are coming back in a big way here. I am heavily into the warbird scene and have 6 build projects stacked up. A close mate has 2, 1/4 spit and 1/5 mossie. Scale and warbirds are huge here, those guys are all builders. Kit cutters here are swamped, they can't keep up with demand for laser cut parts to suit the well known plans, Vailly, Holman, Bates et al. Can't speak for the US and rest of the world. As they say "If you build it, they will come" We love build up kits!! Only TF and SIG are offering build up, maybe some in UK, Flair for example. ARF / ARC will have a place, especially for entry level. But we do want the build kits! I would suggest the modelling manufacturers & suppliers such as yourself need to start at grass roots level like they do in sports. Get into the schools, get programs in place to teach kids how to build, understand aerodynamics etc. If you teach the kids then you are building your market. Gets them away from X box etc too. Here is Oz we have the Airforce cadets run by dedicated mostly ex military folk and part of their curriculum with the kids is building and flying RC models as well as the theory behind it all. Just my 2 bobs worth. Cheers Peter |
RE: Hangar 9 20cc Tiger Moth Build
Pete,
I agree with you I can't find a kit cutter in the US that will take an order before the end of the year! That's even with record breaking price increases in the cost of balsa. John has tunnel vision as does a lot of the hobby industry. ARF, BNF, and RTF are still very popular but a lot of the flyers who rode into the hobby on the wave of pre-built airplanes are getting tired of having the same old plane that looks like everyone else's airplane and they want something different. Many show up at the local clubs looking for help to get started in building. We are fortunate to have several good LHS in this area and the owners are telling the same story, building is going up and balsa, ply, and accessories sales are going up. |
RE: Hangar 9 20cc Tiger Moth Build
Well I do have an ARF, just tool delivery of a H9 1/4 scle Tiger Moth. One of the better ARFs.
My current build list: TF GS P47, heavily modified - at painting stage Vailly Tempest 105" Vailly Yak 3 96" TF Cessna 182 96" Spit, glass fuz, foam core wings 96" P40, glass fuz, foam core wings Refurb 90" Spit Currently flying: 1/4 scale SIG J3 Cub Vailly 90" Seafury - all build up JMI P51D 82" glass fuz, build up wings Flair Astrohog just retired a 30 year old Pica 65" spit |
RE: Hangar 9 20cc Tiger Moth Build
ORIGINAL: Peter_OZ Well I do have an ARF, just tool delivery of a H9 1/4 scle Tiger Moth. One of the better ARFs. My current build list: 1937 Ryan SC-M prototype 1938 Ryan SC-W Production model TF Cessna 182 TF Corsair (redesigned smaller model) Dornier D-1 biplane so ugly only Dornier could love it! Assembling materials for the following: Uravitch Cessna 190 Charles Richard 1/4 scale 1946 Globe Swift Now flying: SIG LT40 SIG 1/5th J-3 Cub Ace R/C monoplane that I don't remember the name of it's a .19 3 channel tail dragger GWS Beaver foamy SIG Rascal C |
RE: Hangar 9 20cc Tiger Moth Build
Gosh, I though my build list was unwieldy.
In the order I started them (so far as I can recall)... Tony Nijhuis Hurricane (62") Tony Nijhuis Spit Mark 9 (62") Peter Rake Sopwith Tabloid (Prototype) Tony Nijhuis Supermarine S6b Balsa USA Sopwith Pup (1/6th) Goldberg anniversary Piper Cub Balsa USA Ne17 (1/6th) Dave Hurrell BE2c (1/6th) Cheers, Hugh |
All times are GMT -8. The time now is 02:41 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.