Balsa U.S.A. cub acc.
 

I'm looking for some accessories for my 1/4 scale balsa usa j3 cub. cockpit kit,interior kit, scale landing gear, and cowl with engine. Anyone help point me in the right direction?

RE: Balsa U.S.A. cub acc.
 

BUSA has a fiberglass cowl available, and a plastic dummy engine kit. I have both, the cowl is nice, but IMO too thin; I'll layer some glass cloth inside it to beef it up before I use it. The dummy engine is okay, but I'll probably just use it as a scale guide and make my own.

Scale gear is available from Robart and from Wm Wallace. Wallace's website is www.piperj3gear.com

I'm not sure about a cockpit kit. With pictures, it wouldn't be difficult to scratch build one, not a lot of stuff in there. Some pics below, the landing gear shown is 1/5 scale, Robart in back, Wallace in front, but the 1/4 scale looks the same; then a Cub interior

RE: Balsa U.S.A. cub acc.
 

You can get fiberglass cow , with or without dummy engine, from Fiberglass Specialties or Precision Fiberglass.

You can get a cockpit interior from Dynamic Balsa.

RE: Balsa U.S.A. cub acc.
 

I have alot of how to on my site including info on building a very scale looking Engien. Take a look and feel free to ask questions