RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Scale Aircraft (https://www.rcuniverse.com/forum/rc-scale-aircraft-169/)
-   -   Mick Reeves Models contact problem (https://www.rcuniverse.com/forum/rc-scale-aircraft-169/6066260-mick-reeves-models-contact-problem.html)

splais 07-03-2007 12:56 PM

Mick Reeves Models contact problem
 
Does anyone know what is up with Mick Reeves Models. I've tried to order from them twice now and get no response. I followed their internet instructions to the letter. This past week I tried again and requested a "read receipt". Best I can tell they haven't even read my email yet.

I'm in need of a 1/3 Vickers gun if anyone has one.

Frank Sopwith 07-03-2007 02:46 PM

RE: Mick Reeves Models contact problem
 
Never had any problem with Mick, order by E-mail; package delivered within a week!!

Frank

jmodguy 07-03-2007 04:18 PM

RE: Mick Reeves Models contact problem
 
Maybe he's on vacation or something. He runs a very small shop from what I understand. Keep trying. His service is fast to the states too.

Jeff

BobH 07-03-2007 08:06 PM

RE: Mick Reeves Models contact problem
 
I've odered from Mick a couple of times and never had a problem getting my order. He could be on holiday?

John Sohm 07-03-2007 08:56 PM

RE: Mick Reeves Models contact problem
 
Check out Balsa USA website under accessories. They have a 1/3 Vickers gun kit for $29.75

eagledancer 07-05-2007 06:12 PM

RE: Mick Reeves Models contact problem
 
mick could be out flying in competitions, hes a great guy to deal with, i have the 1/3 camel kit of his and its top notch.
the 1/3 vickers did leave a bit to be desired but on a camel most of it is hidden anyway. i have also built one from busa and it leaves a bit to be desired also. i sure wish williams bros would come out with one in this scale

splais 07-05-2007 07:05 PM

RE: Mick Reeves Models contact problem
 
I have the ArizonaModels 1/3 Vickers kit coming now; but don't look forward to putting that together - yes, Williams needs a 1/3 vickers and Lewis [:o]

splais 07-09-2007 09:45 PM

RE: Mick Reeves Models contact problem
 
Has anyone had any contact with MRM in the past three or four weeks. I still have not been able to make any contact with them. Do they close for weeks at a time, or the whole summer?

I received the Arizona Models Vickers gun kit and as far as I'm concerned the thing is worthless (incomplete instructions, dozens of small parts, instrutions that refer you to an unreadable print of real gun measurements to determine scale sizing, etc, etc).

mickreeves 05-01-2011 12:14 AM

RE: Mick Reeves Models contact problem
 
We are here most days (and nights) only away two sundays a month in the summer for contests.
Email. [email protected]
site www.mickreevesmodels.co.uk
Uk phone 01 354 653063. Overseas 00 44 1 354 653063 or similar. Fax the same but on in business hours.
Mick

LesUyeda 05-01-2011 06:18 AM

RE: Mick Reeves Models contact problem
 
"I received the Arizona Models Vickers gun kit and as far as I'm concerned the thing is worthless"

I did that once; found out that I was better off designing myself, and contracting out the laser cutting.

Les

ARUP 05-01-2011 07:22 PM

RE: Mick Reeves Models contact problem
 
I see MR has responded in kind. Nice folks, nice products and well worth any wait! I have two of their 1/4 Camels and Bleriot plans set.


All times are GMT -8. The time now is 05:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.