RCU Forums - How to make antennas

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Scale Boating (https://www.rcuniverse.com/forum/rc-scale-boating-103/)

- - How to make antennas (https://www.rcuniverse.com/forum/rc-scale-boating-103/10653077-how-make-antennas.html)

giddyuperic

08-03-2011 06:53 AM

How to make antennas

Like the marine wip kind what kinds of things are you guys using?? I know wire stock could work but what else is there out there? Any help would be great?

Apismelifera

08-03-2011 07:00 PM

RE: How to make antennas

Small diameter spring wire from the K&S rack at your hobby store. If you need to you can solder the end. I use 600 grit paper, then solder it. I also put a short piece of yellow heat shrink tubing on the top end so I can see it. Pick a diameter that springs back the way you like. The thicker the wire the faster it will snap back to straight.

giddyuperic

08-03-2011 11:40 PM

RE: How to make antennas

Thanks I am going to hit the LHS up when it cools down here. It is hotter the goats but sitting in a pepper patch. Thanks

All times are GMT -8. The time now is 02:04 PM.