tooth paste for bad teeth
 

OK, this may sound wierd and a fine play on words but has anyone heard of using toothpaste as a break-in media for metal gears? I have heard of it in the automotive world. It has excellent lubricious and abbrasive properties. Might give it a try and report back. My HL's are sapping too much power.

RE: tooth paste for bad teeth
 

A couple of guys here have mentioned using it with good results.

RE: tooth paste for bad teeth
 

HI
watch out for that tooth decay ,, which flavour ??
tankless at the moment
bills bills bills
hmmmmmmmm need a tank or two doh !!!

RE: tooth paste for bad teeth
 

I have, in this forum as a matter of fact. First, remove the oil and grease from the metal gears. Then apply toothpaste to all the teeth and run the gears for an hour or two. Afterward, clean off the toothpaste and apply new grease to the gears.

RE: tooth paste for bad teeth
 

what type of toothpaste did you use?

RE: tooth paste for bad teeth
 

not the gel but the abrasive paste, I'm thinking Crest.

RE: tooth paste for bad teeth
 

Another thing that works great is any type of puice hand cleaner. You know the type that you can feel the grit and it washes off easily..

KT

RE: tooth paste for bad teeth
 

For all intents and purposes, abrasive toothpaste is essentially very fine grit rubbing compound. Many RC car racers have been using it to break-in their drivetrains for well over 25 years.

RE: tooth paste for bad teeth
 

Now consider what it does to your teeth!

Titanium Dioxide.....not good

RE: tooth paste for bad teeth
 

Excuse the ignorance.... What is the best way to get the toothpaste off without taking the gearbox apart? Is there a magic solvent to use other than water?

RE: tooth paste for bad teeth
 

let me replace the word ignorance with lazyness.. i took them appart.

RE: tooth paste for bad teeth
 

how did the TP work for you? I now have some Lava hand soap and I am wondering which to use.

RE: tooth paste for bad teeth
 

i dont know yet. im putting the gearbox back together now. stay online i will tell you in about 5 minutes! i used colgate

RE: tooth paste for bad teeth
 

It works well. Runs alot smoother and the toothpaste had a bit of silver glint in it when finished. I hooked the gearbox up to a D cell battery and applied the toothpaste and let it run for an hour and 45 minutes while I ate dinner!

still a bit noisy but more "free" in tightness. Those old school modelers can teach me anytime. I was wrong!

RE: tooth paste for bad teeth
 

Has anyone tried automotive valve lapping compound?

RE: tooth paste for bad teeth
 

With teh hand cleaner I just used REALLY HOT water... of course.. unscrew teh electrical motor... lubricated them... NO PROBLEMS, NO BUILD-UP...

KT