JB COMP

Nope, I need a bump start backplate like you needed, but I haven't got around to ordering it, and I have to figure out if I want to drop a SW26 carb and get more POWER or leave the stock one on there.

and thats my next project, modding the timing on a hyper 21 8-port, trx2.5R and a mach 427 then if it turns out good then I'll mod my STS 21B and STS 30, then I'll have to get some more engines.

qaiz

Im getting an OS .28 XZ

UG0TB4NN3D

My Feedback: (1)

xD You guys get all of these expensive engines. WHERE DO YOU GET THE MONEY? xD

UG0TB4NN3D

My Feedback: (1)

I'm about to go driving my CRT again. O:

qaiz

Byee

Noo my moms paying, I told my parents that I blew my engine, which I kinda did.

And I asked my dad if I could have his Nova 528 which has been modded.

He asked me if I was out of my mind, I said no. Then he said that ive gone crazy.

He said tell your mother that I told her to buy you a new engine.

I told my mom that, she asked me which one I wanted, I said a new V Spec Speed, she asked my dad, he said I was crazy again.

I said OS .28 XZ, she asked my dad, he shook his head, she took that as yes, and now im getting a new engine

UG0TB4NN3D

My Feedback: (1)

xD Wow, you suck. I wish my parents would buy me new engines. :P

Oh, by the way, the adjusting nut on my clutch got caught on the clutchbell and tightened it completely down, which crushed my clutchshoes. =_=

Going to buy new ones from Amain now. >_>

qaiz

I have no clutch shoes left.

i checked it today.

NOTHING.


The reason my parents are buying me a new engine is because I got my report card.

All 90% and above

So they're happy.

And yeah lol.

Cant wait.!

Should also check my gears while im at it.

Not bothered now, 10 in the Night, got school tomorrow.

I dont wanna get any more greaser than I am now lol.

WHEN ARE YOU EVER GOING TO RUN YOUR TOY SERIOUSELY.!!!!????

Theres always something happening with it :P.!

UG0TB4NN3D

My Feedback: (1)

I was running it seriously. Lmfao.

I can still run it with those other shoes, but they're crushed and deformed. @_@

I'll order some and screw around with those until the others come in.

qaiz

Lol.

Your lucky your mom/dad lets you order as much parts as you do.

Mine would break my head lol.

I tried firing up my Ofna .32, it started [X(]

No Nitro, no airfilter.!?

Just for like 2 seconds and out popped the glow plug.!?

Once I get my new one, ill destroy whats left of the Ofna .32

JB COMP

UG0TB4NN3D, I'm with you, my parents don't buy me anything like that, they'll pay for some things that are under $20 but thats not too often. I only paid $30 for that Hyper 21 8-port I have and it came with a good clutch, CB, and flywheel, ht engine it self was ok, if it didn't ave the clutch I would not of paid the $30 I did on it. I only bought it so I can chop away at it modding, and if I mess it up then oh well, toss it on ebay as a part engine and keep the clutch

and the mach 427, was given to me by a friend

UG0TB4NN3D

My Feedback: (1)

Lmao...I don't have any friends who are into nitro, so I've got no one to give me old engines and stuff, so I'm pretty much on my own with breaking the engine in and stuff.

I pay for everything I order, that's why, glad my mom has an eBay account. Lol.

JB COMP

I'm trying to decide if I should order that back plate from ebay or the LHS, if I order from ebay then its going to be $17.43 with shipping, but if I order it from the LHS its $12.99 (I think) pluse tax, and we have to go and pick it up, and we don't go that way often.[&:] what to do. thenabout $15 on diamond files for engine modding.

qaiz

flip a coin

JB COMP

LOL, I'm so broke I don't have one j/k I guess I could

UG0TB4NN3D

My Feedback: (1)

Lol..Just buy it from the LHS. I HATED waiting for mine.

JB COMP

yeah, but I'll have to wait till they get it, then I have to wait till someone to go get it.

UG0TB4NN3D

My Feedback: (1)

Well, mine took about a week to get here through the mail. If it'll take longer than that for the LHS to get it, order it.

JB COMP

but that will be a few more weeks, as Its wet and rainy here this time of year, and I still have to finish my other project (which I kinda put on hold) before I start messing with the mach and hyper.

UG0TB4NN3D

My Feedback: (1)

Should I move my steering servo to my throttle servo? The steering I currently have is like 140 oz, and I think my throttle is like 70 oz.

JB COMP

depends on the speed, for throttle you need a min of .15sec speed and 85oz/in torque and for steering a min of .15sec speed and 150oz/in of torque.

UG0TB4NN3D

My Feedback: (1)

I'm getting a Ds1313 for steering, and I've got a Z650M for steering right now, which would replace the Z590M in my throttle.

I think I'm just gonna take the truck apart, clean it nicely, and set everything up. I'm just gonna take everything slowly so it's all ready when I get everything in.

Gonna have the truck nice and clean for the DS1313, and the new clutch shoes. :P

JB COMP

the Z590 is better for the throttle then the Z650, I have the spektrum Z590 and its great for the throttle, but the Z650 is too slow, you need more speed then torque for the throttle, but no less than 85in/oz of torque for the throttle in a truggy, really the Z650 it slow for steering. the ace DS1313 will be a nice upgrade over the Z650 you'll have more torque and more speed, the response of your truggy will be alot better.

so either put the Z650 for the steering on a different car (if you have one) or save it as a back up.

UG0TB4NN3D

My Feedback: (1)

Awesome..Sounds good.

UG0TB4NN3D

My Feedback: (1)

I'm thinking of buying the BCE chassis for my CRT...To make it identical to the X2 CRT.

UG0TB4NN3D

My Feedback: (1)

I really like that body. o_o They have it for the X1...I WANT IT.