Brushless Truggy pictures and discussion
This thread was started for the people who have brushless truggies or who are interested in learning more about conversions. for the people with conversions post some pictures and videos and setup info. and for the guys who want to start crap about nitro being the coolest thing save it for some one who cares
I have a brushless Rc8t its powered by a mamba monster v2 speed controller a neu 1515 2.5d anfd a zippy 5s 5000 pack. on this setup motor temps after 15minutes are about 160 battery temps and speed controller temps between 100-120. |
RE: Brushless Truggy pictures and discussion
I have a Hong Nor X2 truggy powered by MMM V2, Neu 1515 2D, 5S PQ 5000mah with 13/48 gearing. Very fast around the track & flies like a plane. Jumps higher & farther than ... I get around 15 minutes of run time out of this setup. I would prefer to have more runtime time though. I also have a 5S 6000mah PQ but putting it in the truggy would result in even more l/r imbalance.
I find that with the above setup, I have managed to puff one of my PQs eventhough they are supposed to be 25C rated. My LVC is set to 3.1V per cell already. I hear a lot of good things about the Zippys. ecocav04, are yours the the Zippy H or Zippy R ? What do u think of them ? I also have 2 pcs of 5S 5kmah zippy h but they're reserved for my savage & a little too big for my tray. I'm eyeing some Zippy R 5S 4800mah. What do u think ? Rgards, Joe Ling http://i198.photobucket.com/albums/a...g39/cc01-1.jpg http://i198.photobucket.com/albums/a...ing39/cc04.jpg http://i198.photobucket.com/albums/a...ing39/X201.jpg http://i198.photobucket.com/albums/a...ing39/X203.jpg http://i198.photobucket.com/albums/a...ing39/X204.jpg http://i198.photobucket.com/albums/a...ing39/X205.jpg |
RE: Brushless Truggy pictures and discussion
That thing is sweet. May I ask how much the whole setup would run you?
|
RE: Brushless Truggy pictures and discussion
I waana to see the E-Hellfire:D
Any one try the Novak;s lightning 2 pro brushless convesion kit motor mount & plate on the hellfire ? I wanna to know it's fit or not. Thanks |
RE: Brushless Truggy pictures and discussion
WOW !! that hong nors sweeeeeeet !!!!!!! I hate these electric threads cause I want one so bad lol dang .. unreal[X(]
|
RE: Brushless Truggy pictures and discussion
electric.....LOL
|
RE: Brushless Truggy pictures and discussion
i run the zippy h 5000 in 5s. they're not bad but they're a bit on the big side but they work good
|
RE: Brushless Truggy pictures and discussion
Here are some updated pictures i put the mamba max back in my buggy and bought another mamba monster so far this one is lasting it has 2 race weekends on it so far. i checked out rcmonster mikes rc8t this weekend as he showed up the race we had this weekend. i let him wheel my truggy and he said it handles awesome.
I run the fan on the motor just to keep it even cooler then it would run without it. normally i pull it off the track and its at 160 but i ran a 10 minute b main this weekend and bumped into the A main and ran 15 minutes and after the a main my motor temps were 123. http://i54.photobucket.com/albums/g1...C8Tbody001.jpg http://i54.photobucket.com/albums/g1...C8Tbody002.jpg http://i54.photobucket.com/albums/g1...C8Tbody003.jpg http://i54.photobucket.com/albums/g1...C8Tbody004.jpg http://i54.photobucket.com/albums/g1...C8Tbody006.jpg i changed the way the wires go into the bullits on the mamba monster because where the speed control is mounted i would have to bend my motor wires on a funny angle and i didnt want to do that. http://i54.photobucket.com/albums/g1...C8Tbody005.jpg |
RE: Brushless Truggy pictures and discussion
ORIGINAL: scrambles12 electric.....LOL |
RE: Brushless Truggy pictures and discussion
with my brushless mlst mamba 6800 on 3s geared high it runs at about 160degrees , not related just thought was interesting
|
RE: Brushless Truggy pictures and discussion
ORIGINAL: scrambles12 ORIGINAL: scrambles12 electric.....LOL |
RE: Brushless Truggy pictures and discussion
i have a cen matrix truggy with the castle creations Mamba monster v2, their Preproduction 1515 1y. 5s zippy lipo
Some bling, and some beat up bowties :D http://i152.photobucket.com/albums/s...RE/matrix1.jpg |
RE: Brushless Truggy pictures and discussion
ORIGINAL: CustomTamiyas4Life ORIGINAL: scrambles12 ORIGINAL: scrambles12 electric.....LOL |
RE: Brushless Truggy pictures and discussion
ORIGINAL: scrambles12 ORIGINAL: CustomTamiyas4Life ORIGINAL: scrambles12 ORIGINAL: scrambles12 electric.....LOL |
RE: Brushless Truggy pictures and discussion
ORIGINAL: scrambles12 ORIGINAL: CustomTamiyas4Life ORIGINAL: scrambles12 ORIGINAL: scrambles12 electric.....LOL Feigao 9xl, mamba max, 4s lipo you can probably snag for 250. then the car itself and some odds and ends.. |
RE: Brushless Truggy pictures and discussion
well i got my mamba monster v3 today in the mail in replacement for the v2 i had thet went out. im going to disassemble it tomorrow and see whats different. so far no outside changes have been done the cases are the same.
|
RE: Brushless Truggy pictures and discussion
how are the new brushless setups doing against the nitros? im asking because i know i will need a new motor. so thats $200 plus fuel for the year another 130 so maybe electric may be the way to go.
hmm packs are very expensive. $100+ and having one pack is useless you would need at least 3. still very tempting |
RE: Brushless Truggy pictures and discussion
Caster Racing will have a truggy soon. Their buggies that are electric are awesome especially if you don't want to mess with conversions.
|
RE: Brushless Truggy pictures and discussion
I've been hearing about this Castor stuff FOREVER! It would be nice if it was on the market so I don't have to hear that it's coming...it's coming...it's coming. Is it RTR or a roller? If RTR, what's in it?...or what will be in it...when it comes out...soon?
|
RE: Brushless Truggy pictures and discussion
ORIGINAL: misasi how are the new brushless setups doing against the nitros? im asking because i know i will need a new motor. so thats $200 plus fuel for the year another 130 so maybe electric may be the way to go. hmm packs are very expensive. $100+ and having one pack is useless you would need at least 3. still very tempting |
RE: Brushless Truggy pictures and discussion
Sorry for the late reply :
1) Truggy - USD515 2) Motor - USD250 3) Battery - USD180* 4) ESC - USD160 5) UBEC - USD30 6) Servo (ACE DS1015) - USD85 No including radio & charger, the setup is approximately USD1220. Truggy & servo purchased locally. Battery came from Hong Kong / China. Other items were imported from USA. *will be trying out the USD90 Zippy Rs with slightly lower capacity but only half price soon. ORIGINAL: CustomTamiyas4Life That thing is sweet. May I ask how much the whole setup would run you? Joe Ling |
RE: Brushless Truggy pictures and discussion
exciting
|
RE: Brushless Truggy pictures and discussion
1 Attachment(s)
Check this out guys. Purpose built electric! Should be out soon. Wish I could see more pics.
[link]http://www.neobuggy.net/modules/news/article.php?storyid=5074[/link] |
RE: Brushless Truggy pictures and discussion
ORIGINAL: ecocav04 Here are some updated pictures i put the mamba max back in my buggy and bought another mamba monster so far this one is lasting it has 2 race weekends on it so far. i checked out rcmonster mikes rc8t this weekend as he showed up the race we had this weekend. i let him wheel my truggy and he said it handles awesome. I run the fan on the motor just to keep it even cooler then it would run without it. normally i pull it off the track and its at 160 but i ran a 10 minute b main this weekend and bumped into the A main and ran 15 minutes and after the a main my motor temps were 123. http://i54.photobucket.com/albums/g1...C8Tbody001.jpg http://i54.photobucket.com/albums/g1...C8Tbody002.jpg http://i54.photobucket.com/albums/g1...C8Tbody003.jpg http://i54.photobucket.com/albums/g1...C8Tbody004.jpg http://i54.photobucket.com/albums/g1...C8Tbody006.jpg i changed the way the wires go into the bullits on the mamba monster because where the speed control is mounted i would have to bend my motor wires on a funny angle and i didnt want to do that. http://i54.photobucket.com/albums/g1...C8Tbody005.jpg Why not use Velcro to hold the fan down? doesn't the wire tie flex the case and stop are flow? I don't do electric but just wanted to ask. |
RE: Brushless Truggy pictures and discussion
ORIGINAL: happywing I've been hearing about this Castor stuff FOREVER! It would be nice if it was on the market so I don't have to hear that it's coming...it's coming...it's coming. Is it RTR or a roller? If RTR, what's in it?...or what will be in it...when it comes out...soon? |
All times are GMT -8. The time now is 01:50 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.