RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Truggy (https://www.rcuniverse.com/forum/rc-truggy-399/)
-   -   HELP!! Please Mugen mbx5t (https://www.rcuniverse.com/forum/rc-truggy-399/9229065-help-please-mugen-mbx5t.html)

dbone02 11-04-2009 10:25 PM

HELP!! Please Mugen mbx5t
 
I have an mbx5t running with a Novarossi 528x I keep blowing clutch bearings like nothing (every 2 runs) I replaced clutchbell, motor mount, re aligned motor many times.. I dont want to give up on nitro please help.

chaserogesr14 11-04-2009 10:38 PM

RE: HELP!! Please Mugen mbx5t
 
that is crazy i am having the same problems. usually my bearings go real quick. but if im lucky they will make a race day.

stussman 11-04-2009 11:02 PM

RE: HELP!! Please Mugen mbx5t
 
Do you have a vented bell, shimmed correctly,what springs and clutch are you running?

happywing 11-05-2009 06:16 AM

RE: HELP!! Please Mugen mbx5t
 
A lot of Mugen drivers have the same problem...I did. Maybe an aftermarket clutch setup is the answer? I don't know and gave up. My Mugen is electric now...and I'm happy.

supertib 11-05-2009 07:41 AM

RE: HELP!! Please Mugen mbx5t
 
what gearing and clutch are you running ? as well what motor mount are you using ?

chaserogesr14 11-05-2009 01:47 PM

RE: HELP!! Please Mugen mbx5t
 
im using the stock mugen mount with a losi 427 and a losi clutch and a friend let me use a fioroni one and it didnt help at all and now im gonna try a brand new losi clutch. i kept thinking it was my engine

chaserogesr14 11-05-2009 01:50 PM

RE: HELP!! Please Mugen mbx5t
 
im using the stock mugen mount with a losi 427 and a losi clutch and a friend let me use a fioroni one and it didnt help at all and now im gonna try a brand new losi clutch. i kept thinking it was my engine

dbone02 11-05-2009 07:46 PM

RE: HELP!! Please Mugen mbx5t
 
im really not sure do you know what i should be using,, Its a 13t CB Vented Iv played around with shims,,, and its stock mount ,, I have a aluminum clutch but dont know the springs im running a novarossi 528x its a .28

INTEGRA 11-07-2009 09:42 AM

RE: HELP!! Please Mugen mbx5t
 
you'll want to run the softest spring's you can find......9's preferably .28's dont need any help on the bottom end with stall....All you will be doing is slipping the shoes...heating up the clutch...and failing the bearings'......proper stall is key for keeping the clutch cool.

supertib 11-07-2009 11:16 AM

RE: HELP!! Please Mugen mbx5t
 


ORIGINAL: dbone02

im really not sure do you know what i should be using,, Its a 13t CB Vented Iv played around with shims,,, and its stock mount ,, I have a aluminum clutch but dont know the springs im running a novarossi 528x its a .28


get a new clutch bell.....chances are your bell is worn out and allowing the outer race of the bearings to spin...

dbone02 11-07-2009 11:29 AM

RE: HELP!! Please Mugen mbx5t
 
thanks im gonna try it today


All times are GMT -8. The time now is 10:11 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.