SisT FW-190 A8 Schwarze 8
#1
Senior Member
Thread Starter
SisT FW-190 A8 Schwarze 8
Hello all, I figured I would start a thread on my newest project of my newly aquired SisT FW-190 A8. I purchased this kit from a gentleman that is also a fellow RCU member. The scheme I am most likely going with is Black 8 flown by Willi Maximowitz.
This will most likely take some time to build as I am very busy as of late. I will also be asking fellow members for help and advice when I have questions, and I will have questions. Pics soon to follow.
This will most likely take some time to build as I am very busy as of late. I will also be asking fellow members for help and advice when I have questions, and I will have questions. Pics soon to follow.
#8
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
RE: SisT FW-190 A8 Schwarze 8
There never seems to be enough Sist Fw build threads on RCU to keep me satisfied, seeing as I can't really justify getting one in the near future, so i can't wait to watch this one progress
Good Luck, you lucky dog!!!
Thanks
dave
Good Luck, you lucky dog!!!
Thanks
dave
#9
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
Thanks for the comments guys.
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
#10
Join Date: Dec 2001
Location: Summerfield,
NC
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
RE: SisT FW-190 A8 Schwarze 8
ORIGINAL: dvs1
Very, Very nice!!! Where did you get your static prop, that is one of the last things I need?
Very, Very nice!!! Where did you get your static prop, that is one of the last things I need?
#11
Senior Member
My Feedback: (-1)
Join Date: Mar 2010
Location: Bad Lippspringe, 1944, GERMANY
Posts: 2,658
Likes: 0
Received 0 Likes
on
0 Posts
RE: SisT FW-190 A8 Schwarze 8
ORIGINAL: dvs1
Thanks for the comments guys.
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
Thanks for the comments guys.
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
and some warm water.
#12
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
quote:
ORIGINAL: dvs1
Very, Very nice!!! Where did you get your static prop, that is one of the last things I need?
Who says the prop is static???
_____________________________
KEEP UM FLYIN
ORIGINAL: dvs1
Very, Very nice!!! Where did you get your static prop, that is one of the last things I need?
Who says the prop is static???
_____________________________
KEEP UM FLYIN
#13
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
quote:
ORIGINAL: dvs1
Thanks for the comments guys.
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
D/A is perfectly good to use. acetone is nasty **** to use. also, for cleaning plastic parts, nothing beats dishwashing soap (sunlight for example)
and some warm water
ORIGINAL: dvs1
Thanks for the comments guys.
For those of you who have built this before I have a question on the degreasing of parts. Manual says to use Acetone, is it ok to use denatured alcohol to clean the parts for bonding of structural parts or do I need to make a run to the hardware store?
D/A is perfectly good to use. acetone is nasty **** to use. also, for cleaning plastic parts, nothing beats dishwashing soap (sunlight for example)
and some warm water
So per your advice I started with a bit of the build on the Fuse and am gluing in the wing reinforcement plates. I am using Hysol epoxy as it seems to be the standard for gluing the majority of the plane. The Hysol is a bit pricey though.
#14
My Feedback: (17)
Join Date: Jan 2002
Location: Woodbury,
MN
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
RE: SisT FW-190 A8 Schwarze 8
Good luck. I built a SIS T Fw-190 "Black 8" a few years ago. Great build/great flyer. You can see pictures of it on DJ Aerotech's website. Good luck with yours.
#15
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
Very nice Cal !! I dig it! But I must say when it comes to completed SisT kits, I like every single one that I have seen or has been posted. Makes for picking a color scheme very hard for me when you like them all.
#16
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
Here is the gun hood in traction while the epoxy dries on the support G10 material. Those that have built this can tell I am not following any specific order in the instructions, I'm just trying to get some of the small stuff done, while the Hysol drys on other parts.
#18
My Feedback: (1)
RE: SisT FW-190 A8 Schwarze 8
ORIGINAL: dvs1
Here is the gun hood in traction while the epoxy dries on the support G10 material. Those that have built this can tell I am not following any specific order in the instructions, I'm just trying to get some of the small stuff done, while the Hysol drys on other parts.
Here is the gun hood in traction while the epoxy dries on the support G10 material. Those that have built this can tell I am not following any specific order in the instructions, I'm just trying to get some of the small stuff done, while the Hysol drys on other parts.
BTW I'm a retired union glazier, we used 98 percent medical grade isopropanol (alcohol) to clean everything you can imagine.
It cuts all oily residue from what you're cleaning, and evaporates quickly. I used it after a soap bath on my Fliteskin 109 glass parts, and followed up with glass cleaner to remove any soap or alcohol residue
It was "squeaky clean!"
Lol
#19
My Feedback: (37)
Join Date: Sep 2004
Location: DeKalb,
IL
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
RE: SisT FW-190 A8 Schwarze 8
ORIGINAL: dvs1
Heres the starting point for me, some of the major components.
Heres the starting point for me, some of the major components.
Hey DVS1
I see you couldn't wait to start the build I'm glad you did! I was just looking around the forum and found this SisT FW190 A8 build started to read it and as soon as I saw the pic you posted I knew that was my or I should say use to be mine FW190 kit! SWEET! I get to watch it being built. Like Todd Burley I know I am going to kick my self in the behind[:@] For selling that kit. I am very glad the kit arrived to you safe good luck with the build and with ToddB. and BobH watching they will give you some great pointers both of them are Pros.
Good luck with the build and I am going to sit back and watch[8D]
Badlemon
#20
Senior Member
My Feedback: (13)
RE: SisT FW-190 A8 Schwarze 8
You lucky S O B. Every time I have the money to buy a SiST I can never get one. When I don't have the money they are few and far between.
The SiST is one of the best looking Fw 190 kits (both the Antons and Dora's) out there. Good luck with it and I hope you do it up well. They are worth the effort.
PS: this post is coming to you from the Dora's homeland...
The SiST is one of the best looking Fw 190 kits (both the Antons and Dora's) out there. Good luck with it and I hope you do it up well. They are worth the effort.
PS: this post is coming to you from the Dora's homeland...
#21
Senior Member
Join Date: Jul 2007
Location: San Jose,
CA
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
RE: SisT FW-190 A8 Schwarze 8
Evil,
Me too, but this time I think I saved enough for one
As long as uncle sam doens't take too much I should have enough to get one this year!
I have to finish my P-47 first. I have an Inzpan cockpit already for the 190A too.
Jeff
Me too, but this time I think I saved enough for one
As long as uncle sam doens't take too much I should have enough to get one this year!
I have to finish my P-47 first. I have an Inzpan cockpit already for the 190A too.
Jeff
#25
Senior Member
Thread Starter
RE: SisT FW-190 A8 Schwarze 8
Hey DVS1
I see you couldn't wait to start the build I'm glad you did! I was just looking around the forum and found this SisT FW190 A8 build started to read it and as soon as I saw the pic you posted I knew that was my or I should say use to be mine FW190 kit! SWEET! I get to watch it being built. Like Todd Burley I know I am going to kick my self in the behind For selling that kit. I am very glad the kit arrived to you safe good luck with the build and with ToddB. and BobH watching they will give you some great pointers both of them are Pros.
Good luck with the build and I am going to sit back and watch
Badlemon
I'm glad you found it, I was going to send you a link via email but you beat me to it. Don't worry it is in good hands, and I will enjoy every minute of this build! I do hope you enjoy the build thread.
Curt