1/4 scale P40E Warhawk
#1
Thread Starter
Join Date: Jun 2007
Location: San Antonio,
TX
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
1/4 scale P40E Warhawk
Coming this Spring 2019.
The new P40E Warhawk construction will have all composite parts Gel coated and carbon fiber reinforced. The wing center section is molded in one piece with the fuselage.
That gives more strength to the overall construction and makes field assembly and transportation easy. The wing spar (or wing tube) will be already built in place by us
All you have to do is to build your outer wing panels and install your electronics. The fuselage is constructed in two piece for easy installation of tail gear, and shipping purpose.
Once you have your tail gear installed you simply epoxy halves together.
Here is a list of what you will receive with the 1/4 Scale P40E Warhawk kit. Wingspan is 112"
Gel coated composite fuselage (2 piece)
Gel coated composite horizontal stabilizer
Belly pan
Composite flaps
Gel coated composite cowl (split) with cowl flaps
2 piece Canopy
Foam core wings
Wood for built up wings (optional)
Wood for built up rudder, elevator and ailerons
Wing tubes for horizontal stabilizer and wings
Features:
Removable horizontal stabilizer
Composite fiberglass and carbon fiber constructed parts
Split cowl
Scale details such as panel lines and rivets
Easy building to complete
Plans for wing construction, elevator, and rudder
Any further questions can be send to [email protected]
Pricing and discount specials by email only.
The new P40E Warhawk construction will have all composite parts Gel coated and carbon fiber reinforced. The wing center section is molded in one piece with the fuselage.
That gives more strength to the overall construction and makes field assembly and transportation easy. The wing spar (or wing tube) will be already built in place by us
All you have to do is to build your outer wing panels and install your electronics. The fuselage is constructed in two piece for easy installation of tail gear, and shipping purpose.
Once you have your tail gear installed you simply epoxy halves together.
Here is a list of what you will receive with the 1/4 Scale P40E Warhawk kit. Wingspan is 112"
Gel coated composite fuselage (2 piece)
Gel coated composite horizontal stabilizer
Belly pan
Composite flaps
Gel coated composite cowl (split) with cowl flaps
2 piece Canopy
Foam core wings
Wood for built up wings (optional)
Wood for built up rudder, elevator and ailerons
Wing tubes for horizontal stabilizer and wings
Features:
Removable horizontal stabilizer
Composite fiberglass and carbon fiber constructed parts
Split cowl
Scale details such as panel lines and rivets
Easy building to complete
Plans for wing construction, elevator, and rudder
Any further questions can be send to [email protected]
Pricing and discount specials by email only.
Last edited by Blazing Wings; 01-30-2019 at 01:44 PM.
#6
Thread Starter
Join Date: Jun 2007
Location: San Antonio,
TX
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Presidents Day special on MIG 3 1/4 scale and P40 Warhawk 1/4 scale kit. Save up to 20% on our kits.
For more details what is included, contact me at [email protected]
Special valid until 28th of February. Shipping not included.
All kits made to order only.
For more details what is included, contact me at [email protected]
Special valid until 28th of February. Shipping not included.
All kits made to order only.
Last edited by Blazing Wings; 02-18-2019 at 02:03 PM.
#7
Thread Starter
Join Date: Jun 2007
Location: San Antonio,
TX
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
1/4 scale P40E Warhawk
This is the new P40E Warhawk kit. I will post another pic this month showing what is all included.
I made a new canopy kit in carbon fiber, to replace the one on the fuselage.
I made a new canopy kit in carbon fiber, to replace the one on the fuselage.
#8
Thread Starter
Join Date: Jun 2007
Location: San Antonio,
TX
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
So here is a picture of the complete 1/4 scale P40 Warhawk kit and what is included. The carbon fiber main spar is already glued into place. as well included are ailerons, elevator and rudder and wood to complete building those parts.
Foam core wings and tips. Exhaust stacks, belly pan, cowl, removable horizontal stabilizer, wing tubes and stab tubes, carbon fiber composite flaps, carbon fiber canopy and cowl flaps.
Foam core wings and tips. Exhaust stacks, belly pan, cowl, removable horizontal stabilizer, wing tubes and stab tubes, carbon fiber composite flaps, carbon fiber canopy and cowl flaps.
#9
Thread Starter
Join Date: Jun 2007
Location: San Antonio,
TX
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Don't miss out on this Fall/Winter special. Up to 15% discount on P40Warhawk kit.
Sale from 01.10.2019 - 31.10.2019
For details on special send email to [email protected]
Sale from 01.10.2019 - 31.10.2019
For details on special send email to [email protected]
#10
My Feedback: (12)
I have 3 Carbon fiber spinners for a P-40 that are 7" in diameter if you can use them, great low price. Let me know, Uncle George [email protected] or cell 941-345-3243