KMP Stuka-build details
#1102
Guys, I need your help. There is an error with the gun pods mounting. I made a template for marking the holes and it seems that one hole will be in servo area!
I looked around and found some guy with "tank buster". His Stuka has different paint scheme and location of the servo.
Is there anyone with same type of the wing as on my Stuka with cannons?
I looked around and found some guy with "tank buster". His Stuka has different paint scheme and location of the servo.
Is there anyone with same type of the wing as on my Stuka with cannons?
#1103
Senior Member
Join Date: Apr 2006
Location: MosmanNSW, AUSTRALIA
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
#1106
Yesterday I glued the left wing. The right wing I glued last morning. When I try to fit the wings I found out, the gap between the wing and the central fibreglass part. I try to send it, but without any big success. I put more glued on that space. The result you can see in the picture.
#1107
Some progress on the landing gear. Root covers are glued. On the other shots are the legs locks. The same aluminium plates will be on the pants. Each leg is lock by 4 srews. Plywood blocks are also glued in the pants.
#1110
I was thinking if should I cut a hole for the exhaust stack in the cowl as I did on my Spitfire. I´m sure it would look better, but it is easier to glue the exasuts into the groove which is prepared in the cowl. I cut 9mm (0.35") of each root and fitted the stubs.
#1116
Antenna mast. The shape is not very scale, but the canopy looks better with it. It will removable because of transport. If I glue it, it would be broken after few transports to the airfield.
#1118
Hi Jiri,
nice job on your Stuka !
I have a problem on mine : I just received a brand new cowl from ARF Pro in USA...it's bigger than mine !!!
My ESM Stuka is an Airex / Fiberglass version...I don't understand !
nice job on your Stuka !
I have a problem on mine : I just received a brand new cowl from ARF Pro in USA...it's bigger than mine !!!
My ESM Stuka is an Airex / Fiberglass version...I don't understand !
Last edited by Apache06; 09-11-2017 at 11:10 AM.