warbird trailer
#2
Senior Member
My Feedback: (16)
Join Date: Nov 2002
Location: N. Charleston,
SC
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
RE: warbird trailer
ORIGINAL: geoflying
What is the best way to set up racks on a 6x12ft enclosed trailer for hauling warbirds so they do not get damaged?, photos would be helpful as well, thanks!.
What is the best way to set up racks on a 6x12ft enclosed trailer for hauling warbirds so they do not get damaged?, photos would be helpful as well, thanks!.
http://www.rcuniverse.com/forum/m_11..._1/key_/tm.htm
#3
My Feedback: (6)
Join Date: Jan 2002
Location: Ocala, FL
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
RE: warbird trailer
Geo,
I use a wall-mount rack system as indicated. Each inner bracket (in contact with the fuselage) is bolted into the steel support bracket, then into the trailer vertical framing). Made from 1/2" plywood, they're cut to the plane's former profile, taken off the plans; fits like a glove.
Not one transporting incident in nine years.
I fit five Ziroli/Meister-size models and all support equipment within this 6' X 12' trailer.
NICK
I use a wall-mount rack system as indicated. Each inner bracket (in contact with the fuselage) is bolted into the steel support bracket, then into the trailer vertical framing). Made from 1/2" plywood, they're cut to the plane's former profile, taken off the plans; fits like a glove.
Not one transporting incident in nine years.
I fit five Ziroli/Meister-size models and all support equipment within this 6' X 12' trailer.
NICK