RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Warbirds and Warplanes (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/)
-   -   FW-190 D9 1/5 by fokkerc.com (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/11571397-fw-190-d9-1-5-fokkerc-com.html)

vertical grimmace 02-11-2015 11:28 AM

Originally Posted by Ramstein44 (Post 11981090)
Ok, I'll take two of these.:D Hurry up taxes..

Yo, Charles. Shoot me a PM. I am thinking about bringing the TA 152 to the Air museum at the end of the month. You going?

Ramstein44 02-11-2015 12:18 PM

The entire kits. I ended up scratch building ailerons for my other warbird. You think you can squeeze two of these in a box with that spitfire kit also?

fokke 02-11-2015 12:45 PM

Yes I can put them in the box , it is not problem , tommorow I will finish with the elevator and rudder , then I will wral the balsa ribs and I will be ready. What size you talk about ? 1/4 ?

Ramstein44 02-11-2015 12:58 PM


fokke 02-12-2015 11:28 AM

The elevator and rudder arealmost ready








proteus_X3 02-12-2015 11:51 AM

Great work Rumen.

fokke 02-13-2015 07:19 AM

Thanks Rich
So I am ready with details before covering :)










proteus_X3 02-13-2015 08:29 AM


Now I need too wipe the drool off my face,must be my meds kick in.....:rolleyes:

proteus_X3 02-13-2015 08:29 AM


Now I need too wipe the drool off my face,must be my meds kick in.....:rolleyes:

fokke 02-15-2015 07:48 AM

Thanks Rich but in the rudder I made mstake in the buttom area , so I rebuild it :)




fokke 02-17-2015 12:38 PM

Hi guys, I am glad to show you the first looc of A8 1/4 and 1/5 plans :)

The plans are based around 95% on the original factory Germany plans of the real machine/ This was my idea, to create model maximum near to the original . So this is it



Ramstein44 02-17-2015 12:48 PM


ticketec 02-17-2015 09:46 PM

Looks awesome rumen!

fokke 02-17-2015 11:17 PM

Thank you very much guys, after few time I will present you and FW -190 D9 wood model in 1/4 and 1/5 :)

wurger 02-18-2015 12:00 AM

Fokke.... fantastic work thank you. It is great for us that you are able and willing to produce such things :-)

fokke 02-19-2015 09:21 AM

Thank you wurger :)

Now we have and Dora 9 in 1/4 and 1/5 scale , whoopeeeeee :))))





Ramstein44 02-19-2015 09:29 AM


Joespeeder 02-19-2015 11:39 AM

Just Awesome Fokke !!!

Chris Nicastro 02-19-2015 02:38 PM

Sweet! I like the sound of this idea, 1/4! Very cool.

Nordicz 02-19-2015 05:44 PM


Very nice and very exciting.


fokke 02-20-2015 12:09 AM

Originally Posted by Chris Nicastro (Post 11986646)
Sweet! I like the sound of this idea, 1/4! Very cool.

Thanks guys , Chris it is not only idea, it is reality :)))))) The next step is to cut D9 fuselage and assembling it

proteus_X3 02-20-2015 07:53 AM

Love it your progress ,you have a kind eye for details my friend.I wish I had a field big enough for 1/4 scale,but 1/5 will work just fine for me. I've been lazy on building this past week,it's cold here in the Northeast temp outside is only 4F degrees add the wind chill factor it's -20F. Attic heat is poor at best,when it's that cooled...Brrr:eek:

Chris Nicastro 02-20-2015 06:29 PM

What engine size do you expect will fit in the 1:4 scale version?

Ramstein44 02-20-2015 07:37 PM

DLE 85 is what's going in mine.. Just like my Meister fw190d 1/4 scale. But I bet you could like many of its scale in cowl options, zenoah g62, zenoah gt80, BME 110, or BME 116.

fokke 02-21-2015 07:56 AM

Yes something from 75cc to 120 cc . Now I saw in my plans that is the diameter of cowl in 1/4 , it is 265mm or 10,43"inches ,probably and moki 150 cc. I need too check in moki site for their dimentions

All times are GMT -8. The time now is 08:00 PM.

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.