RCU Forums - FW-190 D9 1/5 by fokkerc.com

Page 13 of 29

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Warbirds and Warplanes (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/)

- - FW-190 D9 1/5 by fokkerc.com (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/11571397-fw-190-d9-1-5-fokkerc-com.html)

proteus_X3

02-27-2015 08:08 PM

Quote:

Originally Posted by JGrc (Post 11992183)

Rich,

make sure to post a report on this engine. I thought about using it in my Ta152 but because of the lack of reports, decided to use the DLE 55RA which does not fit completely in the cowl. http://www.rcuniverse.com/forum/rc-w...152-h1-12.html

JG

JG,
Sure no problem,but it will be a while,sine I have a few over projects going on now.There a pretty good thread on it on FG if you care too read.I myself was impressed with a couple of youtube video's pf a 82.5" ESM ,FW-190 Dora. Cheers: Rich

https://www.youtube.com/watch?v=7ubGtYwg7p0 https://www.youtube.com/watch?v=AJJdNJoGacU

ticketec

02-27-2015 09:41 PM

Quote:

Originally Posted by proteus_X3 (Post 11992309)

Thanks!!! ;);)

The first vid is my Dora!

It has been an awesome engine for me. Love it to bit's and would build another model based purely on that engine alone.

Some more links for you.

https://www.youtube.com/watch?v=1P8l...wIEDw&index=14 first run of the XYZ

https://www.youtube.com/watch?v=yvE2...1BJZcl-jAwIEDw

https://www.youtube.com/watch?v=dICM...1BJZcl-jAwIEDw There is zero dampening on the camera when I took that video. just a bit of double sided tape.

https://vimeo.com/33210524

Sorry for the distraction fokke! back to the awesome 1/4 Anton and Dora's!!

Thanks

Dave

fokke

02-28-2015 01:24 AM

Don't worry Dave the engine discussion is useful for the topic

My next step is to make all scales cowls for the both models Then I will know the correct dimentions and what will fit in them

proteus_X3

02-28-2015 07:36 AM

Quote:

Originally Posted by ticketec (Post 11992350)

Thanks!!! ;);)

The first vid is my Dora!

It has been an awesome engine for me. Love it to bit's and would build another model based purely on that engine alone.

Dave,
Your maid video of the ESM 190 impressed the most. Imho engine runs on test stands [static runs are only good for setting idle and max power ]. Performance of a engine is best seen with the engine Loaded [married to an Airframe ] ,your aircraft performed well on it's maiden. You have a good reliable idle and smooth transaction too max power without any stumbling,good tuning job . I like you last 2 videos first time viewing them great job love the pilot head movement! On your later videos your engine is running stronger and smother and your plane is flying more scale,thanks for sharing.:cool: I need to ask you a few question if you don't mind?I know that you purchased your engine from OctopusRC, with CM-6 plus and 22-10 prop ,so I will not ask redundant questions.

Engine:

Engine performance what is your idle and max power RPM your current set-up?
Any upgrades,plug[I think you said you changed plugs and mufflers] what about ignition?
Timing,did you change it,also any reed block work[Frank Bowman said some XYZ engines need a reed block mod[ little honing around reed block and or truing of reed block it self].Also some of these engines the time is off resulting in poor idle/max power performance ,should be 28 degrees before TDC report of off by 12 degrees [40 before TDC]

Airframe:

May ask what is the total weight of your model?
with of your cowling?

Thanks for your time in advance,these question would be a great help,since your model is very close it weight and wing span too Rumen's design. Cheers: Rich

fokke

02-28-2015 12:09 PM

I forgot the Moki 150 and 250 for 1/4 A8

http://i61.tinypic.com/35jf3mc.jpg

proteus_X3

02-28-2015 08:07 PM

Quote:

Originally Posted by fokke (Post 11992728)

I forgot the Moki 150 and 250 for 1/4 A8

Hmmm Moki Goooooooodddd! Wish I could afford one:p

fokke

03-06-2015 04:21 AM

New piece of wing

http://i61.tinypic.com/wt7s07.jpg

http://i57.tinypic.com/2v84as8.jpg

http://i57.tinypic.com/keb05z.jpg

http://i61.tinypic.com/20rqkhx.jpg

fokke

03-06-2015 04:53 AM

The difference between 1/4 and 1/5 scale . Theplastic line is 30 sm.

http://i60.tinypic.com/1239oxx.jpg

http://i62.tinypic.com/1zchgzm.jpg

Sessholvlaru

03-09-2015 11:55 AM

1 Attachment(s)

Any chance you could offer cowl parts for your 190 D9? At 8.5" they are a perfect fit for my project.

fokke

03-09-2015 12:28 PM

Hmmm interesting, the 8.5" is diameter of the cowl ?

Are thay same like D9 ?

Sessholvlaru

03-09-2015 12:33 PM

Yeah my cowl outside diameter is 8.5". The cowls are very similar. Just the number and orientation of the cowl flaps is different.

fokke

03-09-2015 12:47 PM

Can you show me some pics of your model , I can make plans of this cowl just for you ?

vertical grimmace

03-09-2015 03:36 PM

Maybe they used similar engines? After all the, the high altitude FW 190 series were using bomber engines.

fokke

03-12-2015 11:36 AM

Studio pictures of FW 190 D9

http://www.fokkerc.com/snimki/FW/studio/_MG_1105.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1221.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1222.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1236.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1240.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1246.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1271.JPG

http://www.fokkerc.com/snimki/FW/studio/_MG_1213.JPG

fokke

03-12-2015 12:11 PM

fokke

03-12-2015 01:13 PM

JGrc	03-12-2015 01:38 PM

Hey Rumen, don't forget to post some photos! :rolleyes:

Cheers,

jose

vertical grimmace

03-12-2015 03:34 PM

One extreme, and then the other, right Jose! lol

proteus_X3

03-12-2015 03:59 PM

Rumen,
WOW! outstanding photo'st thanks for the update buddy,BTW I received my Bentley drawings for the FW-190 and the Hawker Tempest ,very nice. Cheers: Rich

fokke

03-15-2015 10:53 AM

Thanks Rich

Update 1/4 cowl A8 and D9

http://i61.tinypic.com/ipsksh.jpg

http://i57.tinypic.com/2h5mn3m.jpg

proteus_X3

03-15-2015 11:00 AM

Looking good and Moving right along buddy, very nice!I couldn't wait any longer so I started working on a old Platt FW-190 Dora kit I had for years,I think I'm going too make it into a TA-150B or C.Cheers Rich

Nordicz

03-16-2015 05:26 PM

Rumen,

That is some outstanding work and photography. I really like how you got your son into the pics. Very nicely done.

Z

fokke

03-16-2015 11:14 PM

1 Attachment(s)

Thanks Z
The photographer is a good , he work for some magazines like , Vogue , Elle, Esquire and other :)
Here another shot

fokke

03-18-2015 09:06 AM