The second set of molds 1/5 scale are redy to
So the 1/5 scale models FW190 A8 and Dora 9 are available for saleto :)

I made one new detail for D9 , one wood rib who need to be fix in the composite cowl

http://i62.tinypic.com/2qtwb6e.jpg


http://i60.tinypic.com/8yg93n.jpg


http://i57.tinypic.com/k3669f.jpg

NICE!!!!!:cool:

You might think about making that plywood ring wider, so it can be used to mount the cowl with screws. Typical of most FW 190 cowl mounting.

In the Top Flite GS Corsair I redesigned the cowl mount so there are 4 longitudinal threaded studs in the firewall and the cowl ring is attached there. The cowl itself is attached to the cowl ring radially with small external screws in small hard wood blocks. This way the cowl flaps are part of the cowl ring independent of the cowl. You can remove them together or one at a time. I made the cowl flaps work on the ring too.
Turned out pretty slick and saved the cowl from the vibrations the single cylinder engine puts out. I had the cowl come loose in flight twice before I redesigned its mount. Operating Cowl flaps is another story...

Yes, that's was my idea for the wood ring , I hope to be for more easy fixet for the fuselage

Here is the work on plug and mold for vacoom forming

My frend Lyidmil make mold of A8 1/4 canopy for vacoom forming

Thanks my friend !!!!



http://www.fokkerc.com/snimki/FW/stu...424_123909.jpg


http://www.fokkerc.com/snimki/FW/stu...424_141841.jpg


http://www.fokkerc.com/snimki/FW/stu...424_161933.jpg


http://www.fokkerc.com/snimki/FW/stu...424_174214.jpg


http://www.fokkerc.com/snimki/FW/stu...424_203227.jpg


http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0051.JPG


http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0052.JPG


http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0057.JPG

Awesome work as usual Mr fokke.

Thnk you very much Brad !

<a href="https://www.youtube.com/watch?v=mjlxk1fXUgU" target="_blank"> https://www.youtube.com/watch?v=mjlxk1fXUgU https://www.youtube.com/watch?v=mjlxk1fXUgU

http://i58.tinypic.com/24wulco.jpg




http://i58.tinypic.com/4kvcwh.jpg

http://i57.tinypic.com/2ebzuib.jpg


http://i61.tinypic.com/jubud3.jpg


http://i62.tinypic.com/16is38o.jpg


http://i62.tinypic.com/20p2c7p.jpg


http://i62.tinypic.com/zircl4.jpg


http://i60.tinypic.com/rhkffo.jpg

Nice! One should be included in each kit!

Nicely done Rumen.

Z

I need one for my office!

Haha!

They are very cool! Well done Rumen!

The cowl looks great!!

Thanks

dave

Yes Chris , in each kit will have a small gift :) Forsome of the first kits have and other gift to

Rich , send me your adress ;) maybe you prefer to be Ta 152 ?

Thanks Dave !

Very Cool Rumen !!

I'd like to order two of the little guys.

One as a display model and one to create a practice "stick" plane with a dowel handle.

How do I order 2 of them ?

Joe

Rumen,Hey buddy those are very cool indeed ! throw one in my Dora kit,any update on when the Dora will be ready for shipment?BTW how did you like the FPV on the Mustang I sent you? Rich

Joe, what models you want , Dora9 ? I can make you spetialy "stick" plane with a dowel handle. Just show me some picture and I can make it
Guys this small models are not for sell , so I can send you as a gift with letter :)

Rich , remember me which models is this ?

Rumen, 1/5 scale Fw-190 Dora :cool: Cheer's: Rich

Hi Rumen,

That's a very gracious offer..... Please don't spend your valuable time making a special bit for me. The D9 as shown is what I would like and I can add the stick myself.

A "stick" plane is used as a visual aid to show maneuvers by "flying" it like you would when you were a kid. I like to keep one in my car so that when we are at the field and describing maneuvers to others we can see the angles and shapes of the maneuvers.

The best example is try flying single file with friends and tell them each to do a barrel roll as they pass the flight stands. You'll get as many different styles of rolls as you have flyers....

Then show them the shape and style of roll you want by using the little practice stick plane and suddenly they will start to look much more uniform.

You see stick planes for the 3D guys, and if you really search you'll see them for a couple of jets. But the Warbird guys have to make their own.

Here's an example.

http://www.rcuniverse.com/forum/atta...mentid=2093223

I'd like to PayPal you something. Your time is valuable and the little D9's are way cool !!!

Joe

If you are really ambitious you could create some like this !! :D

http://www.rcuniverse.com/forum/atta...mentid=2093224

I see Joe, what model airplane you want , FW 19D9 , FW 190 A8 , BF- 109 E , BF 109 G or Spitfire or some other plane ?

About my ambitions, I was start to make this one but my no time for this toy for my son ... :)


Rich , send me an Email on [email protected]


regards

Thanks Rumen,

Two of the FW-190 D9 please.

Thanks !!

Joe

Rumen email sent buddy.:D

Can you tell me when the 1/5 D-9 and A-8 kits will be available? Prices and shipping also.

Thanks,
Tony