RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Warbirds and Warplanes (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/)
-   -   CY MODELS La-7//Evolution 160 radial (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/11640003-cy-models-la-7-evolution-160-radial.html)

n8622t 06-29-2017 02:19 PM

CY MODELS La-7//Evolution 160 radial
 
Just getting started with stripping wing and detail pubs

n8622t 06-29-2017 02:26 PM

2 Attachment(s)
Robart 635RS retracts will replace stock

n8622t 06-29-2017 02:32 PM

6 Attachment(s)
Wing stabs and rudder are all built up fully sheeted and covered in a solar Tex type of fabric

n8622t 06-29-2017 02:34 PM

Fiberglass fuse and cowl

n8622t 06-29-2017 02:38 PM

6 Attachment(s)
Will sand this all off and add more detail before paint scheme goes on

n8622t 06-29-2017 02:42 PM

8 Attachment(s)
All I got done today....marked CG on wings and belly to guide the gear relocation

n8622t 06-29-2017 02:45 PM

2 Attachment(s)
I did notice that the thrust offset is built into the nose of the cowl which will help a lot with keeping the radial centered in the in the cowl opening

n8622t 06-29-2017 03:30 PM

I think that this plane is one of few that the evolution 160 will fit within a cowl...what a shame

n8622t 06-30-2017 06:21 PM

2 Attachment(s)
Time to upgrade the axles to 1/4"

n8622t 06-30-2017 06:24 PM

6 Attachment(s)
1/4-20 drilled and tapped

n8622t 06-30-2017 06:25 PM

2 Attachment(s)
Now to move the gear

n8622t 07-01-2017 06:55 AM

6 Attachment(s)
opened wing in area of new gear mounts

n8622t 07-01-2017 06:58 AM

2 Attachment(s)
first rib template is made....fortunately it fit both wing halves

n8622t 07-04-2017 09:11 AM

4 Attachment(s)
Templates are cut and trial fitted

n8622t 07-04-2017 09:14 AM

4 Attachment(s)
Gear blocks cut and trimmed

n8622t 07-04-2017 09:16 AM

4 Attachment(s)
Now to glass open bays and glue new mounts down

n8622t 07-04-2017 09:17 AM

2 Attachment(s)
Right side finished!!!

n8622t 07-04-2017 09:19 AM

4 Attachment(s)
All lines up correct....can't wait to get the radial mounted

n8622t 07-04-2017 09:20 AM

Move on to glass work

n8622t 07-04-2017 01:07 PM

4 Attachment(s)
Very well built!!!

n8622t 07-04-2017 06:27 PM

2 Attachment(s)
One wing ready to glass....done for the day

n8622t 07-04-2017 06:29 PM

2 Attachment(s)
One more pic, my scheme, "Ivan the Terrible"

n8622t 07-06-2017 07:19 AM

4 Attachment(s)
Ailerons are all that's left then to lay the glass to it

moparbob498 07-07-2017 04:17 AM

That's coming along really, really nice....thank you for sharing

n8622t 07-07-2017 07:39 AM

Thanks moparbob....should have some new pics this afternoon


All times are GMT -8. The time now is 10:33 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.