RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Warbirds and Warplanes (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/)
-   -   Completed DS B-17 (https://www.rcuniverse.com/forum/rc-warbirds-warplanes-200/2943850-completed-ds-b-17-a.html)

flydoc 05-04-2005 08:35 PM

Completed DS B-17
 
1 Attachment(s)
Here are a few photos of my completed Don Smith B-17. It took two years of work to get to this stage. It weighs approx. 45 lbs, and is powered by 4 RCV 90sps, swinging scale 15.5x14 props. I test flew it during open flying time at Top Gun, and it flew well, although not for very long. It seems I miscalculated on the prop pitch, resulting in bogging the engines down below their best power. It should have a bit more power with 10 in pitch props. As it was, I landed after about 10 seconds of flight when i judged the power to be marginal, and i didn't want to risk stalling. The second B-17 is Mitch Epstien's "Nine 0' Nine".

exeter_acres 05-04-2005 08:46 PM

RE: Completed DS B-17
 
Two words....


Wow.......and Wow!

Katchmarek 05-04-2005 09:30 PM

RE: Completed DS B-17
 
Howard, Nice, very nice indeed! I know Mitch, a real good guy, and Nine O'Nine is a superb model. In fact, Mitch's B-17 was the first airplane featured on my website!
Best of luck with her,
Rob

SCALECRAFT 05-04-2005 09:47 PM

RE: Completed DS B-17
 
Nice work

I have a RCV120sp and the manual (online) shows a 3 blade prop to be 15-10 I think. So if the 120 is using a 15-10?? Check it out.

Good luck with the B-17

Steve

F4u5 05-04-2005 10:10 PM

RE: Completed DS B-17
 
Very nice bird. I commend anyone who can build a 4 engine plane....that's dedication and ya did it well. Happy flying!


All times are GMT -8. The time now is 04:46 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.