Rockslide 1/8 Questions
#1
Thread Starter
Join Date: Aug 2011
Location: Blodgett, OR
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Rockslide 1/8 Questions
Hello,
I got this crawler to convert to an autopilot rover with a Pixhawk flight controller. I got a lipo ESC and changed the receiver.
It worked great. Now I am changing it back to stock, except for the ESC. I put the original receiver back in and hooked everything up.
Two things, There is no steering and it goes faster in reverse and the braking works in reverse not forward. The steering trims are at 0.
Front channel one, throttle channel two, rear channel three.
Is there a way to reset to factory defaults?
Thanks
Jerry
I got this crawler to convert to an autopilot rover with a Pixhawk flight controller. I got a lipo ESC and changed the receiver.
It worked great. Now I am changing it back to stock, except for the ESC. I put the original receiver back in and hooked everything up.
Two things, There is no steering and it goes faster in reverse and the braking works in reverse not forward. The steering trims are at 0.
Front channel one, throttle channel two, rear channel three.
Is there a way to reset to factory defaults?
Thanks
Jerry