RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

lol, glad i could put your mind at ease, lol.:D

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

i want to know if a duratrax clutch and gears would work on the lightning Manufacturer Stock#DTXC7123

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

sorry man didnt read far enough.love my tornado bb,great!!

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

have any of you guys who upgraded the clutch still have problems with the car not shifting and gettin stuck in 1st or 2nd gear? or is the upgrade to the clutch simply to stop the clutch bell from stripping the gears and a slight performance enhancement?

i was thinkin of just switchin to a single speed transmission and not havin to worry about the car getting stuck in 1st or 2nd gear.

any opinions? or suggestions?

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

i would go with the direct drive single speed, i have it and love it, 1 speed is better for off road anyways

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

for the hpi clutch set up...which springs are better to use?
gold or black?

http://www3.towerhobbies.com/cgi-bin...?&I=LXVK12&P=7

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

Well I just became the victum of my clutchbell eaten up my gears. I just orderd everything I needed to get back to runin again. Cant wait!!! Thanx for the post as it was great help findin exactly what i needed.

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

I have done the hpi clutch bell upgrade and still stripped out the the first gear, I did not do the spring yet, what else could be causing this.

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

Double check your gear mesh and use blue lock tite to keep screws from vibrating loose

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

thanks, what is the easiesst way to use the paper trick on the bb, it seems really hard to get two withthe gaurd.

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

the best way is to come up threw the bottom of the chassis. you can remove the handle temporarily to get better access

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

sounds good just waiting on the gears now

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

I have a HPI trophy 3.5 buggy with a .21 engine and want to upgrade the Clutch bell. I think it has a 13T and i woundered will i see much difference if i droped in a 16T or 21T? any help would be much appreciated. Thanks!

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

So why wasnt this ever made a sticky? What would be the best clutch and bell housing to use on a 2 speed?

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

I've gotta bull that needs that Sh

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

bump!!

part numbers are out of date,

anyone have links to these clutch parts from HPI???<br type="_moz"/>

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

its the cluch bell setup from an rs4 3 evo

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

http://www.youtube.com/watch?v=9xCSmzzaa10

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

I'm running into clutch issues on my EQ with the aluminum shoes dragging. I cleaned them up with a file and replaced the spring with a new one I think it will work for a while... I was wondering if anyone has found a good replacement shoe or a complete clutch replacement for the sh .21. <div>Thanks.</div>

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

Will those work on a Caldera 3.0?
It's a SH .18 Engine.
<br type="_moz" />

RE: CLUTCH BELL AND CLUTCH SPRING UPGRADES
 

Sorry, duplicate post... Blame my laptop!