Volcano Pullstart
 

Hi, im looking for a new pullstart for my volcano. will other brand pullstarts bolt up?, if so what are the codes?
my engine is the vx.18
thanks

RE: Volcano Pullstart
 

This one works, I know because I am using it and feel it's a good pullstarter - http://www2.towerhobbies.com/cgi-bin...6&I=LXN412&P=K

RE: Volcano Pullstart
 

thats is bro, hpi pullstarter, i have the same one on my tornado

RE: Volcano Pullstart
 

It's a nice pullstarter too, and on HPI's website they show you how to rebuild them (if necessary).

RE: Volcano Pullstart
 

the cord came out my current one i guess thats normal like the clutch spring breaking? or is it because i am pulling to hard or someting

RE: Volcano Pullstart
 

Pulling too hard, over extending it.

Check to be sure you aren't flooding things before you try to start it.

You can fix it, just pull it apart carefully ... search the forum for some tips, and look on HPI's website for their tips as well.

RE: Volcano Pullstart
 

do the hpi ones have metal wheels that hold the string on?

RE: Volcano Pullstart
 

Are you sure that pullstart from towerhobbies will work on a stock volcano??

RE: Volcano Pullstart
 

the pull start from radcat dose not have a part # on it! i think this may be why redcat sends the wrong one for the VX .16 and .18

hope they can get this fixed

RE: Volcano Pullstart
 

ok guys, to clarify, there are 2 pullstats for the vx.18, somewhere along the line, someone decided to change the backplates on them. there is a 1/4 difference in the bolt pattern, you need to measure which one you have and see which one to order, one is 1" from center of screw to center of screw, the other is 1 1/4

RE: Volcano Pullstart
 

Wow whoever switched the backplate is stupid now. tysm for your help ehroof now i know which pullstarter to get! FINALLY


:D:D:D:D:D:D:):D:):):D:D:D:D:D

RE: Volcano Pullstart
 

i posted in the other thread for you bro.

RE: Volcano Pullstart
 

it's not the bolt pattern!!!! i have the right bolt pattern! the hole for the one way is to small!

RE: Volcano Pullstart
 

Eddie,,,
I have BOTH Back plates (2 Volcanoes) and I need a p/n for the Pullstart of the SMALL one. Or even better, The link for a rotostart Backplate for the small one.
If you already Posted it somewhere, I'd appreciate a link to that thread.......Thanks....

Here is the link for a roto start that will fit the BIG back plate...I use this one my oldest Volcano SV....
http://www3.towerhobbies.com/cgi-bin...7121&search=Go

RE: Volcano Pullstart
 

I know I'm not the king but do you mean this http://www.redcatracing.com/itemdeta...artno=11011H12

RE: Volcano Pullstart
 

your correct pede, and this is the pullstart: http://www.redcatracing.com/itemdeta...=S022pullstart

RE: Volcano Pullstart
 

Awesome guys! Thanks....
[sm=what_smile.gif] I guess I coulda found those myself if I had bothered to look at Redcat, Huh?
Sorry.....

RE: Volcano Pullstart
 

ooops doublepost....