Diff Braces on Avalanche
 

Ok new question. I broke something else. Not a big deal, i can still run it but im not jumping it anymore till i get this fixed. I need to find the part numbers for the parts pictured below, but cant find them. Its the rear brace that goes from the center of the chassis to the top of the rear diff, It snapped the screw off inside the brace, and broke the plastic mount in three pieces [:@] I can drill out the screw at my dads, and i superglued the plastic back together but i know that wont last. I searched Redcatracing.com but didnt see these parts listed separately. HELP!

BTW I LOVE the fact that you can take then engine of without changing the gear alignment. The way this engine mounts is the way the 1/10th cars should be too, especially since they are so sensitive to alignment with the plastic spur gears.

RE: Diff Braces on Avalanche
 

Are these what your looking for? lol I dont have them in stock and redcat is running low so order fast. Or i can get them for you. Let me know http://www.redcatracing.com/itemdeta...p?partno=88008

RE: Diff Braces on Avalanche
 

Yup thats part of it. I think i can salvage my rear brace though, im going to try to drill out the broken screw without destroying the threads, if not i will tap it to a different size and find a screw. I also need the plastic part that the rear brace connects to on the diff.

RE: Diff Braces on Avalanche
 

You should upgrade the plastic mount to this one.

http://www.redcatracing.com/itemdeta...?partno=81611B

RE: Diff Braces on Avalanche
 

Sweet now thats what im talking about :-) Thanks Nick! I assume the only difference is the wing mount and it will otherwise fit the same?

I didnt even think to look in the monsoon stuff for parts for the avalanche, but i guess most of them are the same pieces?

RE: Diff Braces on Avalanche
 

Yes that is the only difference

RE: Diff Braces on Avalanche
 

Awesome, thanks!