RCU Forums - Setting

RCU Forums (https://www.rcuniverse.com/forum/)

- Redcat Racing Support (https://www.rcuniverse.com/forum/redcat-racing-support-427/)

- - Setting (https://www.rcuniverse.com/forum/redcat-racing-support-427/7034503-setting.html)

zeen420

02-06-2008 04:50 PM

Setting

1 Attachment(s)

Just wondering what is a neutral/factory setting, position for the( grub screw )setting on the 2 speed ( i.e. how many turns? ).. was tinkering with it and set it on the floor gave it a little push and the gear mesh sounded really bad and I just meshed it yesterday

TNIGS

02-06-2008 07:01 PM

RE: Setting

the grub screw dosent do anything to the mesh. just ajusts when it shifts

TNIGS

02-06-2008 07:02 PM

RE: Setting

your bolts on the bottom of the engine are probebly loose

zeen420

02-06-2008 07:07 PM

RE: Setting

no, there on there good, lock-tite and all.... but i was fiddling with the adjustment grub screw on the 2speed and now it seems the mesh is off... just wondering how to set it back to an original setting

zeen420

02-06-2008 10:53 PM

RE: Setting

AffordableRC

02-06-2008 10:57 PM

RE: Setting

The 2speeds clutch should not affect the gear mesh at all. The factory settings for the shift point should be around 1 1/2-2 turns out.

zeen420

02-06-2008 11:00 PM

RE: Setting

Wicked, thats what I wanted to hear! Thanks!

All times are GMT -8. The time now is 04:39 AM.