fixing the steering link
1 Attachment(s)
During break in the steering link came off. I could not find the parts. Can someone give me a link to the parts I need for this?
|
RE: fixing the steering link
What vehicle is it?
|
RE: fixing the steering link
by the radio box, tires, and a-arms I am sure this is a monsoon
|
RE: fixing the steering link
Yep it's a Monsoon.
|
RE: fixing the steering link
Sorry couldn't tell guess I have my monitor too dark or something, causes it looks all blackfor the most part.
Do you only need the swivel ball? |
RE: fixing the steering link
GO TO WWW.REDCATRACING.COM,GO TO PARTS,PART#60038-STEERING BALL LINK AND PART#60083-CAP HEAD MECHANICAL SCREW. PS CHECK ALL SCREWS TO MAKE SURE THEY ARE TIGHT DO NOT OVER TIGHTEN
|
RE: fixing the steering link
usually I look to see if the screw has enuff threads showing to put a locknut on it...if it doesnt I buy a bit longer screw that will allow me to do just that....regardless, it is very important to go over the rc before its ran and check all the screws and put blue locktite on all screws going into metal
|
RE: fixing the steering link
I typed in the part number and nothing showed up.
|
RE: fixing the steering link
I need the screw.
|
RE: fixing the steering link
Call them next week [&o]
|
RE: fixing the steering link
I could get the part or parts from other places. I just don't know which screw I need.
|
RE: fixing the steering link
WOW!!!!, your still waiting on an answer?....you need a 3mm x 16mm countersunk screw and a 3mm nut....you can take the one from the other end of the steering link to your local hardware store and they maybe able to hook you up....if not check out rtlfastners.com
|
RE: fixing the steering link
|
RE: fixing the steering link
I'd also suggest these screws for the knuckles...they are a bit longer (stock arent long enuff in my opinion).....I put a bit of tire glue (super glue) on the threads right before I screw em in...this helps keep them tight, and the 2mm longer screw helps also...if not you risk fighting screws coming loose and or pulling the threads outta the front knuckles
http://rtlfasteners.com/Merchant2/me...oduct_Count=36 |
All times are GMT -8. The time now is 04:39 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.