RCU Forums - EPX Pro ESC spec's

RCU Forums (https://www.rcuniverse.com/forum/)

- Redcat Racing Support (https://www.rcuniverse.com/forum/redcat-racing-support-427/)

- - EPX Pro ESC spec's (https://www.rcuniverse.com/forum/redcat-racing-support-427/9697656-epx-pro-esc-specs.html)

billymare

04-29-2010 09:59 AM

EPX Pro ESC spec's

Does anyone have the specs on the stock Brushless ESC?

RedCat_Chris

04-29-2010 11:48 AM

RE: EPX Pro ESC spec's

Billy here are the specs from our website- Automatic Brushless Electronic Speed Controller
Input voltage: 7.2v-8.4v NIMH Battery pack, 7.4v 2s lipo
Output: 540s motors less than 5000kv
BEC:5v 1A
Heat fan: optional part # 03320
Temperature cut of at 200F
Voltage cut off: 6V
Foot print: 45mm*55mm*25mm fan excluded

If there is something you were looking for that is not covered in this please feel free to email me directly at [email protected]

billymare

04-29-2010 12:13 PM

RE: EPX Pro ESC spec's

Kudos to Chris at redcat... superb customer service!!!

All times are GMT -8. The time now is 08:49 PM.