![]() |
2011 race planes
1 Attachment(s)
With only two races left in norcal ( SAMs and Tomcats ) and especially with me coming into the season late, I have to admit that I am really looking forward to the 2011 racing season. Although the Macchi has exceeded my expectations my competitiveness wont allow me to not manage my way into the Gold and Unlimited classes.
I am sure I am not the only one with something new on the boards for next season, so let's see 'em guys...........whats in the works? |
RE: 2011 race planes
Shawn,
Just to let you know, we are updating some of the rules in our classes to spread the wealth with airplanes. If you want to peak at the rules and give some input, let me know. You can stop by one evening and take a looky!!!! Warn me ahead of time so I can put away all my secret weapons!!! |
RE: 2011 race planes
1 Attachment(s)
I've got 2 composite P-39s on the way. Each will be powered by a YS110. I just started painting, today.
I hope to finish my P-47 after the last couple races. And, let's not forget that there is still one other race. Dale Kralis putting on the "Two-Minute Tango" on October 24th, also. |
RE: 2011 race planes
1 Attachment(s)
Been making some progress on next years airplanes. Next is foam cutting..........yea
|
RE: 2011 race planes
I finished sheeting my new wings for the either Stiletto or Tsunami for .46 modified/Silver.
My first time doing foam wings. Went the vacuum route. Seemed to come out pretty well. If I sight down the leading edge there might be a slight bow. Perhaps my pool table is not as flat as I think. - Joe. |
RE: 2011 race planes
Got some wings cut and sheeted, just finishing up on the small stuff before glassing starts. On the .60 size Macchi I decided to go with retracts. First time I have done a retract install from start to finish. Wasn't as difficult as I thought. Has to go with a set of Great Planes .40 size units in order to get them to fit. Looking forward to racing next year but may have to come for a flying visit and hang with some of you Sac guys.
|
RE: 2011 race planes
We should have at least two of these for the 2011 season.
http://i23.photobucket.com/albums/b3...e/DSCN3311.jpg http://i23.photobucket.com/albums/b3...LANREDUCED.jpg |
RE: 2011 race planes
Great start, Chad!
I saw that on your Hellcat build thread you were offering those kits for sale. Are you offering the "CzechMate" kit for sale, as well? |
RE: 2011 race planes
ORIGINAL: Iron Dog Great start, Chad! I saw that on your Hellcat build thread you were offering those kits for sale. Are you offering the ''CzechMate'' kit for sale, as well? |
RE: 2011 race planes
Well Chad, if it flies well, and you choose to . . . I'm definitely interested.
What is the wing area? Ollie |
RE: 2011 race planes
ORIGINAL: Iron Dog Well Chad, if it flies well, and you choose to . . . I'm definitely interested. What is the wing area? Ollie |
RE: 2011 race planes
A little more progress, I got servo boxes installed and wires in place, next I will be glassing. Thinking I may paint the whole airplane this time. Retract install came out pretty well I think.
|
RE: 2011 race planes
Man that looks nice. I gotta learn to build like that ;)
|
RE: 2011 race planes
Thanks, always nice to get a compiment from a peer.
|
RE: 2011 race planes
Very clean! It is looking fast already
|
RE: 2011 race planes
Speed,
I'm building my 2011 plane out of maple and rubberized CA.... If I can't fly through you then maybe I can just bounce off ya. :) Seriously, my 2011 plane should hopefully come out a bit stronger and faster, even though it doesn't really need to be faster.... insert theme music from 6 million dollar man series. Jimmy Skids |
RE: 2011 race planes
Jimmy, Looks like the trash talk is starting early hahah. As we get closer to race season I will remind you that you will have to catch me to fly through me.
Seriously though I am looking forward to getting these two birds in the air and racing with you guys again. The gold Macchi should be pretty fast. I'm looking at a finished weight of around 7 lbs and it is being powered with a Rossi 61 FIRE that I spent 2 days grinding on. Gotta get it on a bench and do some pipe and prop testing soon. Actually found some Titanium bearings for it too so obviously curious how it does. The smaller Macchi has a slightly more aggressive airfoil then the last one but I'm going to keep her in silver but should pretty much rule .46 modified here in San Jose. |
RE: 2011 race planes
1 Attachment(s)
OK making slow progress but getting closer. The tails are all mounted and hinged. All that is left on both of them is to hinge the ailerons and they are ready for cover and paint. When a CF pipe I ordered comes in I will start testing the engine with different pipe and prop combinations for the gold airplane. I know the combo that works well for the silver airplane so leaving it alone. Besides my hope is that my daughter will pilot that one in bronze next year.
|
RE: 2011 race planes
1 Attachment(s)
Here are my new"twins", just in time for 2011.
|
RE: 2011 race planes
Iron Dog,
Those are very cool! I love seeing something other than Mustangs. Blessings, Terry |
RE: 2011 race planes
Hey guy's something different to race, hopefully will be able to race with you guys in Sac.
|
RE: 2011 race planes
For some reason cannot post pictures. Try again later
|
RE: 2011 race planes
My buddy Robert is getting this one dialed in for 2011.
http://i23.photobucket.com/albums/b3...CAT/VOGEL4.jpg |
RE: 2011 race planes
1 Attachment(s)
Ok I think I can show you a different race plane for next season
|
RE: 2011 race planes
Wow Babe your actually going to race her, I can't wait to see her in the air, she looks amazing on the ground.
James |
| All times are GMT -8. The time now is 02:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.