Searching Magazinarticel for A-26 Invader (96") Gary Fuller Semiscale out RCM 08/2004
Hello
I look for the magazine-contribution about the model A-26 Invader in Semiscale of GaryFuller. The best would be a Scan of the magazine-sides as return, I have the plan from this Model. Many Thanks an sorry for my bad english Bernd |
Bernd...not sure I can come up with it, but I will try. Gary flies in the club I belong to and I have seen the Invader first hand. Our next meeting is in January and if he is there, I will ask. He usually attends the meetings, but it is Winter. If you can get it in the meantime, I will monitor the thread just in case.
|
Hello Hookedonrc
Thanks for your answer.I can wait also until January Maybe somebody still reports If no one reports, you are my single help Many Thanks Best Regards Bernd |
Bernd,
I can get you a hard copy of the copy of the article via the mail if you like. Just PM your address (or e mail me at [email protected]). Craig |
Article scanned and emailed to Bernd.
Anyone have a copy of this plan they can part with? I refuse to deal with RCM!! Thanks. |
E-Mail
Hello DrcRaig
The Articel has not yet arrived. I got only one Mail where you asked whether the Mail is there Best Regards Bernd |
Happy
Hello
I have received the Articel from Craig I am very happy for tis. Many Thanks an Craig I have the Plan as Scan in Tiff of my PC Best Regards Bernd |
Drcraig. Are you still looking for plans. Gary wasn't at the meeting, but I have been in touch via email. He says he has heard there are problems with RCM taking money and not delivering plans. Gary doesn't have any, but said he could probably draw them. If you are interested, I can see if he minds you working directly with him. If ok, I can give you his contact info.
|
Thanks for the offer - and thank Gary too. Asking him to draw the plans over again would be nuts!!
After I emailed the article to Bernd, he emailed me back a scan of the plan and "hemikiller" is printing it for me. So, I think I am all set. Thanks again. |
No problem, glad to be of help if needed. Let me know if you have questions down the road.
|
Originally Posted by hookedonrc
(Post 11713225)
Drcraig. Are you still looking for plans. Gary wasn't at the meeting, but I have been in touch via email. He says he has heard there are problems with RCM taking money and not delivering plans. Gary doesn't have any, but said he could probably draw them. If you are interested, I can see if he minds you working directly with him. If ok, I can give you his contact info.
I had no problem getting the full sized plans. I'm just beginning my second build of Gary's A26. The first model was great, very easy to fly with almost trainer like characteristics. However, like all twins, it does not respond well to mishandling of asymmetric flight! The first one bit the dust. I ran Century Jets retracts and Saito 61 FS .The Saito's provided plenty of power. It looked great in the air especially when doing flat out low passes! The new model will be much the same, although I've changed to electric actuators on the retracts. What I would like to do if possible is set up contact with Gary. Could one of you tell me how I can contact him please? |
A 26 Invader Plans
Hi, I am looking for this plans. Any can help me to get it ?
Thanks Juan |
Hello Juan
I have the Plans uploaded to Outerzone include Magazinarticel https://outerzone.co.uk/plan_details.asp?ID=5882 Greetings Bernd |
Great Plans and additional info Bernd
Thanks a lot Juan |
All times are GMT -8. The time now is 10:02 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.