Large Plane Stand
#1
Member
Thread Starter
Join Date: Jul 2020
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Large Plane Stand
This is a large plane stand I made on a 3D printer. I have one nearly complete. The pictures are a prototype. The shipping is $13.00. It takes about a week to make one. Please let me know if you are interested.
Thank you,
Wes.
Thank you,
Wes.
#3
Member
Thread Starter
Join Date: Jul 2020
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
#13
Member
Thread Starter
Join Date: Jul 2020
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
#15
Member
Thread Starter
Join Date: Jul 2020
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Hi Gerald,
I shipped your stand today. You'll need to glue the clamps to the bases with the blocks and glue the feet to the bases. I suggest some 30 minute epoxy. Here is the tracking number: 1Z03RV700398792086. It went UPS ground.
Thanks,
Wes.
I shipped your stand today. You'll need to glue the clamps to the bases with the blocks and glue the feet to the bases. I suggest some 30 minute epoxy. Here is the tracking number: 1Z03RV700398792086. It went UPS ground.
Thanks,
Wes.