Fea Bao MB 339
#1
Thread Starter
My Feedback: (7)
Fea Bao MB 339
EDIT: I am pulling this jet off the market. I've been working on it all the while this add has been posted and now I have it fixed up so nice I have to keep it!! :-)4
Used MB 339. I bought it to restore it. It's got some time on it and I disassembled it to bring it up to my demanding specifications. Unfortunately I just don't have a decent flying site for it around here ( it's BIG) so I've decided to sell it. I got a good deal on it so passing that on.
It came with a beautiful Behotec 180 propane start engine with 4.53 hrs on it that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
TRANSMITTER IN PICTURE IS NOT INCLUDED
Used MB 339. I bought it to restore it. It's got some time on it and I disassembled it to bring it up to my demanding specifications. Unfortunately I just don't have a decent flying site for it around here ( it's BIG) so I've decided to sell it. I got a good deal on it so passing that on.
It came with a beautiful Behotec 180 propane start engine with 4.53 hrs on it that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
TRANSMITTER IN PICTURE IS NOT INCLUDED
Last edited by mitchilito; 10-02-2018 at 02:56 AM.
#2
Used MB 339. I bought it to restore it. It's got some time on it and I disassembled it to bring it up to my demanding specifications. Unfortunately I just don't have a decent flying site for it around here ( it's BIG) so I've decided to sell it. I got a good deal on it so passing that on.
It came with a beautiful Behotec 180 propane start engine ( not sure how much time is on it but I don't Think a lot) that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
This ARF is is over $4,000 new (without engine). I'm asking $3200 with Behotec 180, $2,000 without. NOT SELLING ENGINE without airframe.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
It came with a beautiful Behotec 180 propane start engine ( not sure how much time is on it but I don't Think a lot) that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
This ARF is is over $4,000 new (without engine). I'm asking $3200 with Behotec 180, $2,000 without. NOT SELLING ENGINE without airframe.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
God Bless*****
Gary Troutman (flyncrazy)
#5
My Feedback: (168)
Join Date: Mar 2004
Location: Discovery Bay,
CA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Used MB 339. I bought it to restore it. It's got some time on it and I disassembled it to bring it up to my demanding specifications. Unfortunately I just don't have a decent flying site for it around here ( it's BIG) so I've decided to sell it. I got a good deal on it so passing that on.
It came with a beautiful Behotec 180 propane start engine ( not sure how much time is on it but I don't Think a lot) that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
This ARF is is over $4,000 new (without engine). I'm asking $3200 with Behotec 180, $2,000 without. NOT SELLING ENGINE without airframe.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
It came with a beautiful Behotec 180 propane start engine ( not sure how much time is on it but I don't Think a lot) that I will sell with the jet or not. Frankly, I'd love to keep it.
Previous owner had it set up with servo actuated gear but it also came with the factory pneumatic cylinders etc.
servos: Flaps CYS-2220, ailerons/rudder JR DS 8611, elevators Hitec 5645MG.
This ARF is is over $4,000 new (without engine). I'm asking $3200 with Behotec 180, $2,000 without. NOT SELLING ENGINE without airframe.
Note: I've included pictures of the original install before I disassembled. All things in pics are included PLUS a set of Kevlar fuel tanks. Also: this plane has the modded engine placement - the engine is moved forward to reduce nose weight. A great mod.
Thanks1
[email protected]
#6
Thread Starter
My Feedback: (7)
I’m not prepared to ship it - yet. I suppose if I can’t find someone in the vicinity to purchase it I may consider crating and shipping. If I do rctofly will have first option, then you, although it’s going to add a good $500 to the price.
Last edited by mitchilito; 09-03-2018 at 09:30 AM.
#8
Thread Starter
My Feedback: (7)
I am interested, send me pictures of the jet at the present time, I am in Georgia and would be able to pick it up, send the actual pictures to my cell phone 917 667 2175
Thanks
Thanks
Mitch
#10
#15
Join Date: Mar 2007
Location: Winter Springs,
FL
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Hi... I have a 40% Extra 300 I would love to trade. It has a DLE 170 on it. IF you are interested, let me know. I can probably arrange a pickup and delivery. Call me at 321-297-2420 My Name is Michael Wargo. I'll send pics or anything you need after we chat.
#17
Join Date: Mar 2007
Location: Winter Springs,
FL
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
I may be interested in just buying the Jet. Costly to come get it. I have a brother coming here from PA who might be able to pick it up. I listed my number call me if you are interested in selling.