Fly Eagle Jets 1:6 F-16
#1
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Fly Eagle Jets 1:6 F-16
New version Fly Eagle Jets 1:6 F-16 for sale
To late totally dissembled.
Reduction F-16 has been dissembled. $1500 plus shipping unless you are close to Kentucky willing to drive a little. Whoever puts this back together will love it in the air.
Air frame, Pipe, BVM plumed fuel tanks, Gear, Rudder servo(NX6421 retail $279.99) built in due to shipping issues. The long servo extension (twisted tail draggers) going back to the elevator and rudder left in. All the airline still attached to cylinders(robart) Its the good airline. Not the cheap plastic crap This air frame retails for $3300 plus shipping.
$1500 is airframe only as described (502)599-5218
To late totally dissembled.
Reduction F-16 has been dissembled. $1500 plus shipping unless you are close to Kentucky willing to drive a little. Whoever puts this back together will love it in the air.
Air frame, Pipe, BVM plumed fuel tanks, Gear, Rudder servo(NX6421 retail $279.99) built in due to shipping issues. The long servo extension (twisted tail draggers) going back to the elevator and rudder left in. All the airline still attached to cylinders(robart) Its the good airline. Not the cheap plastic crap This air frame retails for $3300 plus shipping.
$1500 is airframe only as described (502)599-5218
Last edited by Ktstroud3; 07-28-2018 at 10:29 PM.
#3
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by [email protected]
hello , could you please to tell me the shipping cost to Miami 33126 Thank you
#4
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by [email protected]
hello , could you please to tell me the shipping cost to Miami 33126 Thank you
#6
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I use the sequencer in my DX18. There are 2 manual adjustable robart valves and spectrum servos running the canopy and canopy locks. There is 2 new evojet Electronic Dual Action Valve (gear and doors) and 1 Electronic Proportional Brake Valve. The are the best electronic valves on the market. I have 4 air systems set up 4 fill valves 5 air tanks all festo Ts 4 air gauges I would leave all the air system installed working $2500. I only use the best quality parts. The build is very clean. Great flying F-16. I really hate to sell must raise money for a truck
Or just make an offer
Or just make an offer
Last edited by Ktstroud3; 07-25-2018 at 09:52 PM.
#7
My Feedback: (57)
I use the sequencer in my DX18. There are 2 manual adjustable robart valves and spectrum servos running the canopy and canopy locks. There is 2 new evojet Electronic Dual Action Valve (gear and doors) and 1 Electronic Proportional Brake Valve. The are the best electronic valves on the market. I have 4 air systems set up 4 fill valves 5 air tanks all festo Ts 4 air gauges I would leave all the air system installed working $2500. I only use the best quality parts. The build is very clean. Great flying F-16. I really hate to sell must raise money for a truck
Or just make an offer
Or just make an offer
#9
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Fej 1:6 f-16
$2500 is me taking the engine, uat, gyro, receiver, elevator, aileron and steering servos out. Leaving a all the air system working all tanks plumed. So basically you add receiver, 5 servos, uat, and engine and go flying
#10
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Fej 1:6 f-16
Again I really hate to sell a great flying jet. If you were at jets over Kentucky you saw us flying it. I was fighting the right main gear cylinder. FEJ is replacing it. At the show I put new BVM main tires on it. I didn’t care for fej’s tires. This is the latest version it’s very strong they are now using airex to build there airframes. I must raise money to keep my small company running. Due to the theft of my new truck and all my work tools. That is the reason I’m selling cheep. Whoever buys it will love it. It flys great. If you don’t fly F-16’s a gyro in my opinion is a must. I only used one low gain setting for takeoff, flying, and landing. And I need the served and engine for another project. I guess I would leave the airframe compete no engine. For the right offer
#12
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
FEJ f16
Originally Posted by [email protected]
Hello, 1500 plus 500 shipping to Miami. Includes,,,airframe,pipe,,tanks,,ruder servo,landing gear, is correct
Thank you
Thank you
cost will be.
#15
Thread Starter
Join Date: Jun 2014
Location: Louisville KY
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Fej f16
Originally Posted by [email protected]
Please the price delivered in Miami FL 33182 Thank you
#17
My Feedback: (57)
Made an offer at asking price + shipping. He agreed and was going to quote me the shipping, even offered shipping through a friend. I was standing by for news, and after not hearing from him I contacted him and he stated he sold it to someone else.
In my book that is an automatic negative feedback, but because RCU does not allow to make formal offers, I can only add feedback here.
This is the first time after 17 years of RCU and MANY successful transactions that I have to give someone bad feedback. O have 100% positive feedback. Never an issue.
David
In my book that is an automatic negative feedback, but because RCU does not allow to make formal offers, I can only add feedback here.
This is the first time after 17 years of RCU and MANY successful transactions that I have to give someone bad feedback. O have 100% positive feedback. Never an issue.
David