Main needle valve setting on Saito 120
07-29-2006 | 01:43 AM
#1
Thread Starter
Senior Member
Joined: Dec 2004
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
From: Virginia Beach, VA
Main needle valve setting on Saito 120
If anyone could give me the baseline needle setting for a saito 120 I would really appreciate it. Long story short, I got a used plane and had to take the main needle valve out and didn't write down the number of turns. Of course after a short while I forgot. I couldn't find any saito manuals online either. Most manufacturers give their manuals online, or maybe I just wasn't looking hard enough. Anyways if someone could give me the setting I would really appreciate it. Thanks.
07-29-2006 | 02:41 AM
#2
Joined: Apr 2006
Posts: 2,275
Likes: 0
Received 0 Likes
on
0 Posts
From: Warialda NSW, AUSTRALIA
RE: Main needle valve setting on Saito 120
G'day Mate,
Start at 3 turns out, start motor & adjust from there, if it is too rich to run at 3 turns out, go in 1/2 turn. The only way to go is suck it & see.
Start at 3 turns out, start motor & adjust from there, if it is too rich to run at 3 turns out, go in 1/2 turn. The only way to go is suck it & see.
