50cc setup smart-fly
hello
Im new in the big scale world and have a yak 54 now 2m20span and DL50cc on it. now for egnition I have a 2cell lipo 1400mah for receiver I have 2 packs 2cell lipo 1800mah. now is my question what is the best choise for switches and stuff for the egnition and receiver. the egnition don't work directly on 2 cell lipo can someone tell me? sunday oure shop gives some promo's on the smart fly stuff so its the moment i think!! greetz from belgium |
RE: 50cc setup smart-fly
Hi,
You should consider the PowerSystem Sport Plus and the IgnitionReg. Also, I would suggest using the Pin & Flag Failsafe Switch & Charge Package but you can also use two heavy duty switches such as the JR or Cermark. Let me know if you have any other questions. |
RE: 50cc setup smart-fly
oke thanks for the fast replay.
I have got a list of our shop batshare/equalizer3D/equalizer2/ignition cutoff/pin and flag failsave/slide failsave/sportreg reg05/powersystemEQ6/powersystem EQ6turbo/turboreg/superreg/ignition regulator/pattern reg/super switch/superswitch HD. so the powersystem sport plus he don't have:( so are there things I can use? |
RE: 50cc setup smart-fly
Hi,
The PowerSystem Eq6 is a bit more than you need but it will move up to a 100cc plane if you ever go that way. |
RE: 50cc setup smart-fly
indeed but if I buy that do I need some switches and ignition reg to??
or don't buy that but slide filesafe switch/superreg a/ignition tegulator and 1 or 2 superswitch HD?? I don't know anything of that stuff,sorry |
RE: 50cc setup smart-fly
Hi,
If you use the failsafe switch you don't need any other switches. You would need the IgnitionReg. You could use the SportReg, IgnitionReg, Failsafe Switch but since you are running your servos off your receiver you will get voltage drop. |
All times are GMT -8. The time now is 05:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.