45 inch xcat
 

hi guy's working on a 45 inch xcat with two proboat outboards with counter props. should be a hoot and look great. they are racing the real boats in china on Nov.8-10. check them out it is stock cars on water. for the reverse flex shaft here is what you need. Craig


http://www.funrcboats.com/ProductInf...d=FRCBDC1563S2

Team Westerlund Racing

Image Gallery « UIM XCAT World Series Powerboat Racing – Official Site

here is the other half. if you build one please post pics here. it builds just like a maxcat. will be very cool on two outboards. :cool::p:rolleyes: Craig

made some progress. these are going to be wild:cool:

xcat race in China. fantastic. check it out.

http://www.youtube.com/watch?v=wJVkx...edium=facebook
http://www.youtube.com/watch?v=5ZLYw...ature=youtu.be

starting to look like a xcat:cool:

hello
it looks very very good ! ! ! !
dirk

progress is slow. but it is looking very cool. more to come.;)

working on the bubble. turning out Great:cool: more to come.

bubble turned out awesome. will glass it tomorrow after I finial sand it:cool:

hi cconeill

loocks nice !

best regards dirk

that is freaking awesome man. what is the paint job gonna look like?

I am doing Matteo Nicolini number 6. it is so cool. but with Mad Lab racing decals;). it is my boat:p glad you like it.

hi

what i see on pic two treat 7 ??
tiger I
pocketbatleship admiral scheer or graf spee ???
oh ... we must excance more pictures :-)
TOP ! ! !
greets dirk

working on it. looking so good.

she is a beaut.

almost ready to run. just prime and paint. have a great 4th Guy's!!

starting to look badass!!!:cool:

hi all need some help. an friend thinks I am lite on my motors. here is my setup. 3660-2050kv aquastar, 120amp turnigy esc, 7200amh 40-80c lipos. hull with everything is 12 pounds. two pro boat outboards. I need motors to fit these??? /thanks Craig

Hi guys here is the maiden run. it is a great running. but getting hot fast. end weight was 18 pounds. so the setup is weak. not that good with electrics. anyone got an idea for a great setup. could use some help. Thanks Craig

https://www.youtube.com/watch?v=wrK0...ature=youtu.be

Hi Craig
great Work
you have to move the OB more to the tunnel so that the Prop runs there.
What prop did you use?
How many S ?
Take care
Axel

Hi Axel I got some cnc props from offshore electrics. 38mm and 42mm. I used the 38mm first. ran with 4s 7200MAH 40-80C LIPOS. AFTER A MIN THINGS GOT VERY HOT. SO NOT SURE IF i NEED MORE MOTOR. OR MORE MORE CELLS?? WHAT DO YOU THINK. cRAIG

Craig i think its a question of adjustment.

can you make a Foto from the side with the hull on a plain hard surface so that i can see the angle of the outbourd and the running height .
It looks that the OB is so mounted that the props are full in the water.

Hi Axel
here you go. I mounted the ob even with the bottom. I am pulling the motors to night and plugging holes. sat. I will move the ob over a 1/2 inch. do I need to move the props up???

here is a picture of my sv-43 vee. very cool boats. it will be 61 inches gas.

Craig you will be running in a circle. For 19lbs you would need the power of about at least 4-5 KW and you can´t put that thru the OB´s because you are limited by the Flex in the OB and the Propsize.
The best chance i see is using 6 S and motors like https://www.hobbyking.com/hobbyking/...?strSearch=h31 or
https://www.hobbyking.com/hobbyking/...arehouse_.html
take care
Axel