|
RE: Micro COD (dialup user be warned)
1 Attachment(s)
In that case may I suggest the Novak Spy esc. I have one for sale in the RCU market. Here is a pic.
|
RE: Micro COD (dialup user be warned)
I have to say thats one small boat!!Lunch box size
|
RE: Micro COD (dialup user be warned)
ok guys. i ran it today.in a small pond in the bottom of a church.
i was filming and my buddy Derek Osborn was running mine. The ones that keeps hitting the was was his sons. they run very good and very fast. Both boats were on 2 cell lipo, stock 280, and a 10 amp SUB micro esc. sorry for the bad quality video. VIDEO COMING ( 10 mins) |
RE: Micro COD (dialup user be warned)
|
RE: Micro COD (dialup user be warned)
i couldnt really see a thing...
|
RE: Micro COD (dialup user be warned)
judging by how fast the wake was forming, i would say its a pretty quick boat....(if i could see it it would be better to tell)
|
RE: Micro COD (dialup user be warned)
don't complain at least i got a video ( rarity)
and i said it was crap. next time i will use my better camera. |
RE: Micro COD (dialup user be warned)
1 Attachment(s)
Taylor I included a photo of my Hard Drive BL motor. They must be re-wound and the magnets must be changed out for much stronger ones. I believe I re-wound mine with somewhere around 22 gauge wire and 11 turns. I swapped out the magnets as the ESC does not work properly with the weak ones at higher speeds. Diagram is included as well.
Ryan |
RE: Micro COD (dialup user be warned)
thats funny. i have had no problem with mine.
it has a lot of power. why ruin a good thing? done it with 2 CD motors both different yet still worked. |
RE: Micro COD (dialup user be warned)
My hard drive motor was most likely wound different then. When it was revved up it buzzed and bogged down severely. Some of the aero guys showed me a web site that helped fix this problem, I was unsure if you tested or not.
Ryan |
RE: Micro COD (dialup user be warned)
ORIGINAL: ryan_t888 Taylor I included a photo of my CD BL motor. They must be re-wound and the magnets must be changed out for much stronger ones. I believe I re-wound mine with somewhere around 22 gauge wire and 11 turns. I swapped out the magnets as the ESC does not work properly with the weak ones at higher speeds. Diagram is included as well. Ryan both different. EDIT i see you edited your post. |
RE: Micro COD (dialup user be warned)
Nice to see some vid of her running. I was hoping for a vid of that cool little boat some day.
|
RE: Micro COD (dialup user be warned)
yea sorry wheelie. its crappy. i will use my own cam next time
|
RE: Micro COD (dialup user be warned)
Does the motor have a ring magnet?
Ryan |
RE: Micro COD (dialup user be warned)
one large ring.
quite strong surprisingly |
RE: Micro COD (dialup user be warned)
In the bottom of a church? I figured RC boats were a religion for you.:)
|
| All times are GMT -8. The time now is 07:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.