waterproof
 

what would be a good,effective way to waterproof this esc?

http://www.hobbycity.com/hobbycity/s...eed_Controller

RE: waterproof
 

HI james94. I have waterproofed one of these "SuperSimple 100A ESC" with a 2 part Dow Corning silicone rubber kit, worked great. I made up a water cooled heat sink and then encased the whole lot with the rubber, used a bit too much rubber so I will use less on the next one. :D

RE: waterproof
 

do you have any pics or links how to do it?

RE: waterproof
 

I've used Scotch DP 270 epoxy with good results.Remove the heatsink and mounting board,,coat both sides of the esc well and scrape the still wet epoxy off the tops of the mosfets so the heatsink will have intimate contact with them.
You can buy it here http://www.offshoreelectrics.com/pro...prod=ose-dp270 and elsewhere (google "dp 270 epoxy" )
HTH
Steve