RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Speed - Electric (https://www.rcuniverse.com/forum/speed-electric-109/)
-   -   ESC Issues (https://www.rcuniverse.com/forum/speed-electric-109/8826007-esc-issues.html)

chickendog 06-04-2009 05:17 PM

ESC Issues
 
<span style="font-size: small"><span style="font-family: Arial">
Everytime i turned on the tranmitter, the motor rev up until i the pull the trigger then release it. It happens on HobbywingSeaking 90A Brushless and the Traxxas EVX 2. Did ido something wrong??? I can't program the Seaking to run in reverse although i followed the instruction. Anyone with a seaking please give me advice.

Also, home come this motor so cheap??? Quality any good?
Turnigy B36-56-06 </span></span><font size="3"><span style="font-size: small"><span style="font-family: Arial">http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6526&amp;Product_Name=Tu rnigy_B36-56-06_1800kv_Inrunner</span></span></font>

BACKEMF 06-04-2009 05:28 PM

RE: ESC Issues
 
I think you need to reverse your throttle servo direction.

Those motors are O.k. but, you do get what you pay for. The sealed red coloured ones may be a bit better. I have a 6XL from them and it seems nice... never ran it yet...

chickendog 06-04-2009 06:23 PM

RE: ESC Issues
 


BIGTHANKS,BACKEMF! Setting the throttle to reverse resolved the motor spin-up when i turn the tx on andno reverse issue.It is a little strange though, since i think pulling trigger back should be for forward.</p>

chickendog 06-04-2009 07:20 PM

RE: ESC Issues
 


There is another issue, when i turned off the TX, the servo sometimes jerked aside.How do i fix it?

empty_space 06-04-2009 07:28 PM

RE: ESC Issues
 
Did you turn the receiver off first and then the transmitter?

chickendog 06-04-2009 08:00 PM

RE: ESC Issues
 
No, i dont' have a switch for the receiver 8( . Ionly plug battery in.

HOTWATER 06-04-2009 09:43 PM

RE: ESC Issues
 
As Jeff Foxworthy says: "HERE'SYOURSIGN!" LOL!! J/K!

chickendog 06-05-2009 03:14 AM

RE: ESC Issues
 
Ok, i take that as i need a switch for the Rx 8)

sundogz 06-05-2009 09:10 AM

RE: ESC Issues
 
Always unplug the battery before shutting down the transmitter. It should go forward when you pull back on the throttle - if it's reversed you have other issues. Seaking esc's have never given me any problems. Sdg

BACKEMF 06-05-2009 01:15 PM

RE: ESC Issues
 
Thats the ticket!



ORIGINAL: sundogz

Always unplug the battery before shutting down the transmitter. It should go forward when you pull back on the throttle - if it's reversed you have other issues. Seaking esc's have never given me any problems. Sdg

chickendog 06-05-2009 05:39 PM

RE: ESC Issues
 
Sundogz, i set the throttle in reverse and PUSH trigger forward to do the setup and then SWITCHthe throttle backto normaland it worked. It is crazy.http://www.rcuniverse.com/forum/js/f...sn/biggrin.gif


All times are GMT -8. The time now is 01:26 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.