Micro coupler
 

Hey all, Im am in need of a coupler that will work with a Mystery outrunner. The shaft dia. is 2.3 mm. I plan to connect it to a .125 flex cable. I have had no luck in finding one. Any iedas? Any one have one they could part with?
Thank you
Joe

RE: Micro coupler
 

try your local engineering shop and see if they can make youup one, i know of places in the UK but not in the US

RE: Micro coupler
 

You aren't going to get one for under $50 that way. There has to be a box on a shelf somewhere that has 30 of them in it somewhere.

RE: Micro coupler
 

i get them made up by a friend to the specs i need here in the UK for £10

RE: Micro coupler
 

Man I may re-think what I said. That's a pretty wierd combo.

RE: Micro coupler
 

Yeah it does seem kind of odd. The .125 flex shaft was the origional set up. I got the Mystery motor later, it just happens to have a 2.3mm shaft. I will probably rethink the set up, but would still like a coupler to fit this motor.
Cheers
Joe

RE: Micro coupler
 

http://cgi.ebay.com/ws/eBayISAPI.dll...ht_2053wt_1024
Should work, cheap too. I used two a while ago.

RE: Micro coupler
 

I have been making several for that size. Let me know if you want any.

RE: Micro coupler
 

Jeff, Yes I would like one or two. Let me double check the size and I will get back to you. I will e-mail your store.
Thanks
Joe.

RE: Micro coupler
 

That is fine...I already have the bits. Nothing odd about that shaft but if you are going to power it up I wuold consider 130 cable. That is what I have made most of. 098 cable may be ok of you keep smaller props.

RE: Micro coupler
 

Hey Jeff; I sent an e-mail to [email protected]. Not sure if that is the correct address. I would like 2 couplers at 2.3mm (motor shaft) by .130 (Flex shaft). Let me know the price, I may only get one. Not to be cheap buy baby is on the way! You can PM me here.
Thanks
Joe

RE: Micro coupler
 

Joe, I did not get anything...it have gone to spam. How many do you want? I will invoice you thru paypal if you give me your e-mail address.

RE: Micro coupler
 

Jeff, I will take one coupler please. My e-mail is [email protected]
Thanks

RE: Micro coupler
 

...

RE: Micro coupler
 

Are oyu sure the cable is 125 or could it be 130 cable? What is it off of to have 125 cable?

RE: Micro coupler
 

It is a .130 cable
Joe

RE: Micro coupler
 

Done and shipping on Wed. for you.

Thanks