RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Speed - RC Nitro Boats (https://www.rcuniverse.com/forum/speed-rc-nitro-boats-117/)
-   -   Outrigger hull need help (https://www.rcuniverse.com/forum/speed-rc-nitro-boats-117/10913510-outrigger-hull-need-help.html)

Frank62499 01-17-2012 09:32 AM

Outrigger hull need help
 
I'm thinking of purchasing a used 41" twin outrigger hull from a customer of mine, but am not sure which company makes it . Can someone help me out .i have pictures I can email. Thanks for your help in advance.

Frank62499 01-17-2012 10:04 AM

RE: Outrigger hull need help
 
[img]webkit-fake-url://2654E855-9A03-465A-AA17-9587C56FE9F2/imagejpeg[/img]

Frank62499 01-17-2012 10:06 AM

RE: Outrigger hull need help
 
Sorry for image quality any help greatly appreciated

advanced builder 01-17-2012 10:28 AM

RE: Outrigger hull need help
 
I don't know of any twins builders.

Dan S 01-17-2012 12:33 PM

RE: Outrigger hull need help
 
I can't see any pics.

Dan.

Dan S 01-17-2012 07:16 PM

RE: Outrigger hull need help
 
1 Attachment(s)
After looking at the pics you sent me it looks like a twin Crapshooter .40/60/80
probably twin .67's
Somebody else can jump in and confirm this.

Dan.

Frank62499 01-17-2012 07:33 PM

RE: Outrigger hull need help
 
Thanks Dan for the assistance.

Ron Olson 01-17-2012 10:09 PM

RE: Outrigger hull need help
 
I don't know whose hull it is but it's an oldie! I'm guessing `80's to early `90's vintage. To be really honest, if you don't have any or little experience with boats, I'd pass. Twins are really frustrating when it come to everything.
It has the look of a Dumas of that era but they didn't make twins. Could be an early Don Pinckert or Crapshooter.
The rear sponsons appear to be mounted too high but kind of hard to tell from the pictures. When sitting on a table they should be hanging lower so that you should be able to see a lot of daylight underneath.

airwolf81 08-15-2012 11:43 AM

RE: Outrigger hull need help
 
i would not but it its too old just saying

airwolf81 08-15-2012 08:30 PM

RE: Outrigger hull need help
 
1 Attachment(s)


ORIGINAL: Ron Olson

I don't know whose hull it is but it's an oldie! I'm guessing `80's to early `90's vintage. To be really honest, if you don't have any or little experience with boats, I'd pass. Twins are really frustrating when it come to everything.
It has the look of a Dumas of that era but they didn't make twins. Could be an early Don Pinckert or Crapshooter.
The rear sponsons appear to be mounted too high but kind of hard to tell from the pictures. When sitting on a table they should be hanging lower so that you should be able to see a lot of daylight underneath.

Ron i LOVE TWINS thats why i have 3 of them LOL. No offense but you are better off buying a new Twin and i have a question do you have any Twin Experience ? it take time,dedication and lots of money to do this Type of boat in excess of $5k you cannot go the cheap route on a Twin Hydro..

Julian


All times are GMT -8. The time now is 11:09 PM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.